Radial Insert Ball Bearing SA207 2RS - Shaft: 35 mm
Item number:
SA207-2RS
Item features:
The bearing insert SA207 2RS can be easily attached to the shaft with the aid of the eccentric ring or inserted in a housing. It is suitable for radial loads. Main dimensions according to DIN 626-1.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 35 |
Outside Ø (mm): | 72 |
Width (mm): | 17 |
Width Extended Inner Ring (mm): | 28.9 |
Tolerance for inside-Ø (mm): | 0,021/0 |
Tolerance for outside-Ø (mm): | 0/-0,013 |
Tolerance for width (mm): | 0/-0,12 |
Extended Inner Ring: | one side |
Shaft Fastening: | Eccentric Collar |
Seal: | 2RS |
Ring Material: | Rolling Bearing Steel |
Rolling Element Material: | Rolling Bearing Steel |
Cage Material: | Sheet Steel |
Type of lubrication: | greased |
Lifetime lubricated: | yes |
Recommended tightening torque for shaft fastener (Nm): | 11 |
Grub Screw: | M8 |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
min. Operating Temperature: | -20°C |
Magnetic: | yes |
Norm: | DIN 626-1 |
Item weight: | 0,47 kg |
Features
- is fastened with eccentric ring and grub screws on the shaft
- suitable for mounting in a housing bearing
- suitable for high loads
- suitable for high speeds with the same direction of rotation
- the spherical outer surface of the outer ring can compensate misalignment if it is installed in a corresponding housing
- seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- lubricated for life; under normal operating conditions relubrication is not required
- comparable with: YET207 (SKF), GRAE35 (FAG), 16207, EN207 (NSK), AEL207 (NTN)
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.