Angular contact ball bearings — Combination for radial and axial forces

Due to their design, angular contact ball bearings can absorb higher axial loads than deep groove ball bearings in addition to radial loads. In single-row angular contact ball bearings, the axial load is limited to one side. Double row bearings can withstand loads from both directions. A special design is the single row four-point contact ball bearing, which is optimized for high axial loads from both directions in limited axial space.

Versions of angular contact ball bearings

Single row
Main dimensions according to DIN 628-1. Can be used for high loads in radial and one-sided axial direction. Suitable for high speeds.
Double row
Main dimensions according to DIN 628-3. Recommended for high loads in radial and both axial directions. Corresponds to the O-arrangement of two single row angular contact ball bearings, but is narrower. Suitable for high speeds.
Four-point contact ball bearings
Main dimensions according to DIN 628-4. Designed for high axial loads in both directions and minor radial forces. The split inner ring allows separate mounting of inner and outer ring. Requires minimal axial space.

Material description of angular contact ball bearings

Angular contact ball bearings made of rolling bearing steel
are cost-effective and can withstand very high loads. The bearing steel is wear-resistant, shock-resistant, conductive and magnetic.
Angular contact ball bearings made of stainless steel
are hygienic, corrosion resistant (to fresh water), sometimes lubricated with food-grade grease (recognizable by the suffix -GF), magnetic and withstand high loads.
Four-point contact ball bearings made of rolling bearing steel
are made of hardened, wear-resistant steel and designed for high axial loads. They offer reliable material performance even in confined installation spaces.

Four-point contact ball bearings made of rolling bearing steel

Datatable
Items 1 - 10 of 190

Image may differ.
  • Delivery time: Available

  • from 4 pcs per 4,03 €
  • from 10 pcs per 3,82 €
  • from 50 pcs per 3,74 €
  • from 200 pcs per 3,65 €
  • from 500 pcs per 3,57 €
4,25 € *
incl. 19% VAT , plus shipping charge
Image may differ.
Item features:
Material composition and design allow high loads.
Roller bearing generates little noise during operation.
Roller bearing is slightly stiff due to friction from seals or grease.
The material used can begin to rust if it comes into contact with fresh water.
Article is only suitable for rather low speeds.
The seal used protects the rolling bearing from the ingress of very small particles.
  • Delivery time: Available

  • from 4 pcs per 4,14 €
  • from 10 pcs per 3,92 €
  • from 50 pcs per 3,83 €
  • from 200 pcs per 3,75 €
  • from 500 pcs per 3,65 €
4,36 € *
incl. 19% VAT , plus shipping charge
Image may differ.
Item features:
Material composition and design allow high loads.
Roller bearing generates little noise during operation.
Roller bearing is slightly stiff due to friction from seals or grease.
The material used can begin to rust if it comes into contact with fresh water.
Article is only suitable for rather low speeds.
The seal used protects the rolling bearing from the ingress of very small particles.
  • Delivery time: Available

  • from 4 pcs per 4,66 €
  • from 10 pcs per 4,43 €
  • from 50 pcs per 4,32 €
  • from 200 pcs per 4,22 €
  • from 500 pcs per 4,13 €
4,91 € *
incl. 19% VAT , plus shipping charge
Image may differ.
Item features:
Material composition and design allow high loads.
Roller bearing generates little noise during operation.
Roller bearing is slightly stiff due to friction from seals or grease.
The material used can begin to rust if it comes into contact with fresh water.
Article is only suitable for rather low speeds.
The seal used protects the rolling bearing from the ingress of very small particles.
  • Delivery time: Available

  • from 4 pcs per 5,00 €
  • from 10 pcs per 4,74 €
  • from 50 pcs per 4,63 €
  • from 200 pcs per 4,52 €
  • from 500 pcs per 4,41 €
5,26 € *
incl. 19% VAT , plus shipping charge
Image may differ.
  • Delivery time: Available

  • from 4 pcs per 5,34 €
  • from 10 pcs per 5,07 €
  • from 50 pcs per 4,95 €
  • from 200 pcs per 4,84 €
  • from 500 pcs per 4,72 €
5,63 € *
incl. 19% VAT , plus shipping charge
Image may differ.
Item features:
Material composition and design allow high loads.
Roller bearing generates little noise during operation.
Roller bearing is slightly stiff due to friction from seals or grease.
The material used can begin to rust if it comes into contact with fresh water.
Article is only suitable for rather low speeds.
The seal used protects the rolling bearing from the ingress of very small particles.
  • Delivery time: Available

  • from 4 pcs per 5,83 €
  • from 10 pcs per 5,52 €
  • from 50 pcs per 5,40 €
  • from 200 pcs per 5,28 €
  • from 500 pcs per 5,15 €
6,14 € *
incl. 19% VAT , plus shipping charge
Image may differ.
Item features:
Material composition and design allow high loads.
Roller bearing generates little noise during operation.
Roller bearing is slightly stiff due to friction from seals or grease.
The material used can begin to rust if it comes into contact with fresh water.
Article is only suitable for rather low speeds.
The seal used protects the rolling bearing from the ingress of very small particles.
  • Delivery time: Available

  • from 4 pcs per 6,47 €
  • from 10 pcs per 6,14 €
  • from 50 pcs per 6,00 €
  • from 200 pcs per 5,87 €
  • from 500 pcs per 5,72 €
6,82 € *
incl. 19% VAT , plus shipping charge
Image may differ.
  • Delivery time: Available

  • from 4 pcs per 6,88 €
  • from 10 pcs per 6,51 €
  • from 50 pcs per 6,37 €
  • from 200 pcs per 6,22 €
  • from 500 pcs per 6,08 €
7,24 € *
incl. 19% VAT , plus shipping charge
Image may differ.
Item features:
Material composition and design allow high loads.
Roller bearing generates little noise during operation.
Roller bearing is slightly stiff due to friction from seals or grease.
The material used can begin to rust if it comes into contact with fresh water.
Article is only suitable for rather low speeds.
The seal used protects the rolling bearing from the ingress of very small particles.
  • Delivery time: Available

  • from 4 pcs per 7,83 €
  • from 10 pcs per 7,43 €
  • from 50 pcs per 7,26 €
  • from 200 pcs per 7,09 €
  • from 500 pcs per 6,93 €
8,25 € *
incl. 19% VAT , plus shipping charge
Image may differ.
  • Delivery time: Available

  • from 4 pcs per 8,84 €
  • from 10 pcs per 8,38 €
  • from 50 pcs per 8,19 €
  • from 200 pcs per 8,01 €
  • from 500 pcs per 7,82 €
9,31 € *
incl. 19% VAT , plus shipping charge