Flange bearing sets of the series SBFL2 (Grey Cast Iron)

Special feature of this series: Flange bearing sets of the series SBFL2 consist of an inexpensive, robust grey cast iron housing FL2 and a separate bearing insert SB2 with extended inner ring on one side and grub screws for fixing the inner ring on a shaft. Static misalignments can be compensated up to an angle of 2°. The design as a 2-hole flange bearing allows installation in a variety of applications, even with limited space at the installation site and is suitable for high radial loads.

Image may differ.

Flange Housing Unit SBFL204 as a Set Comprising Bearing Insert SB204-2RS and Flange Housing FL204 - Shaft: 20 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 5,05 €
from 10 pcs per 4,88 €
from 50 pcs per 4,66 €
from 200 pcs per 4,57 €
from 500 pcs per 4,46 €

5,31 € *

incl. 19% VAT , plus (Standard)

Image may differ.

Flange Housing Unit SBFL205 as a Set Comprising Bearing Insert SB205-2RS and Flange Housing FL205 - Shaft: 25 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 6,08 €
from 10 pcs per 5,89 €
from 50 pcs per 5,63 €
from 200 pcs per 5,51 €
from 500 pcs per 5,38 €

6,40 € *

incl. 19% VAT , plus (Standard)

Image may differ.

Flange Housing Unit SBFL206 as a Set Comprising Bearing Insert SB206-2RS and Flange Housing FL206 - Shaft: 30 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 8,43 €
from 10 pcs per 8,15 €
from 50 pcs per 7,81 €
from 200 pcs per 7,63 €
from 500 pcs per 7,45 €

8,87 € *

incl. 19% VAT , plus (Standard)

Image may differ.

Flange Housing Unit SBFL207 as a Set Comprising Bearing Insert SB207-2RS and Flange Housing FL207 - Shaft: 35 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 11,20 €
from 10 pcs per 10,84 €
from 50 pcs per 10,36 €
from 200 pcs per 10,13 €
from 500 pcs per 9,90 €

11,78 € *

incl. 19% VAT , plus (Standard)

Image may differ.

Flange Housing Unit SBFL208 as a Set Comprising Bearing Insert SB208-2RS and Flange Housing FL208 - Shaft: 40 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 14,01 €
from 10 pcs per 13,57 €
from 50 pcs per 12,97 €
from 200 pcs per 12,69 €
from 500 pcs per 12,39 €

14,74 € *

incl. 19% VAT , plus (Standard)

Items 1 - 5 of 5

FILTER

Reset all filters

Plummer Block Housing Units
Flanged Housing Units
Take-up Housing Units

Special design of the ball bearing

The way, the shaft is fixed with the bearing insert.

An extended inner ring is wider than the outer ring of the article.

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Type of sealing of the bearing to protect it from contamination.

Article number of the bearing insert for housing bearings.

Article number of the housing. The shape and size of the housing can be derived from this.

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Material from which the housing is made.

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.

These bearings are lubricated for the expected service life and do not require relubrication.

Some materials used for rolling bearings are magnetic.

Number of holes that can be used to fix the housing

The fastening screw should be tightened with this tightening torque so that the shaft is sufficiently tight.

Thread size of the fastening screw for the shaft tightening.