Flange bearing sets of the series UELPF2 (Sheet Steel)

Special feature of this series: Flange bearing sets of the series UELPF2 consist of an inexpensive, lightweight sheet steel housing PF2 and a separate bearing insert UEL2 with eccentric ring and grub screws for mounting the inner ring on a shaft. The bearing inner ring is extended on both sides. Static misalignments can be compensated up to an angle of 5°. The round flange bearing design allows installation in a variety of applications and is suitable for high radial loads. The housing is made of sheet steel and is thus suitable for space-saving installations. The galvanized surface has a positive effect on corrosion resistance.

Image may differ.

Flange Housing Unit UELPF204 as a Set Comprising Bearing Insert UEL204 and Flange Housing PF204 - Shaft: 20 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 11,54 €
from 10 pcs per 11,17 €
from 50 pcs per 10,69 €
from 200 pcs per 10,45 €
from 500 pcs per 10,21 €

12,15 € *

incl. 19% VAT , plus (Standard)

Image may differ.

Flange Housing Unit UELPF205 as a Set Comprising Bearing Insert UEL205 and Flange Housing PF205 - Shaft: 25 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 12,85 €
from 10 pcs per 12,45 €
from 50 pcs per 11,91 €
from 200 pcs per 11,64 €
from 500 pcs per 11,36 €

13,53 € *

incl. 19% VAT , plus (Standard)

Image may differ.

Flange Housing Unit UELPF206 as a Set Comprising Bearing Insert UEL206 and Flange Housing PF206 - Shaft: 30 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 18,27 €
from 10 pcs per 17,70 €
from 50 pcs per 16,92 €
from 200 pcs per 16,54 €
from 500 pcs per 16,15 €

19,23 € *

incl. 19% VAT , plus (Standard)

Image may differ.

Flange Housing Unit UELPF207 as a Set Comprising Bearing Insert UEL207 and Flange Housing PF207 - Shaft: 35 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 25,23 €
from 10 pcs per 24,43 €
from 50 pcs per 23,37 €
from 200 pcs per 22,85 €
from 500 pcs per 22,31 €

26,56 € *

incl. 19% VAT , plus (Standard)

Image may differ.

Flange Housing Unit UELPF208 as a Set Comprising Bearing Insert UEL208 and Flange Housing PF208 - Shaft: 40 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 30,15 €
from 10 pcs per 29,20 €
from 50 pcs per 27,93 €
from 200 pcs per 27,30 €
from 500 pcs per 26,66 €

31,74 € *

incl. 19% VAT , plus (Standard)

Image may differ.

Flange Housing Unit UELPF209 as a Set Comprising Bearing Insert UEL209 and Flange Housing PF209 - Shaft: 45 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 34,13 €
from 10 pcs per 33,05 €
from 50 pcs per 31,62 €
from 200 pcs per 30,89 €
from 500 pcs per 30,18 €

35,93 € *

incl. 19% VAT , plus (Standard)

Image may differ.

Flange Housing Unit UELPF210 as a Set Comprising Bearing Insert UEL210 and Flange Housing PF210 - Shaft: 50 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 39,53 €
from 10 pcs per 38,28 €
from 50 pcs per 36,62 €
from 200 pcs per 35,78 €
from 500 pcs per 34,95 €

41,61 € *

incl. 19% VAT , plus (Standard)

Items 1 - 7 of 7

FILTER

Reset all filters

Plummer Block Housing Units
Flanged Housing Units
Take-up Housing Units

Special design of the ball bearing

The way, the shaft is fixed with the bearing insert.

An extended inner ring is wider than the outer ring of the article.

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Type of sealing of the bearing to protect it from contamination.

Article number of the bearing insert for housing bearings.

Article number of the housing. The shape and size of the housing can be derived from this.

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Material from which the housing is made.

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.

These bearings are lubricated for the expected service life and do not require relubrication.

Some materials used for rolling bearings are magnetic.

Number of holes that can be used to fix the housing

The fastening screw should be tightened with this tightening torque so that the shaft is sufficiently tight.

Thread size of the fastening screw for the shaft tightening.