Track Rollers of the series LR6

Special feature of this series
Track rollers of the series LR6 are constructed like single row deep groove ball bearings. They are suitable for higher speeds than track rollers of the series LR2, LR50 and LR60 at the same inner diameter. The surface of the outer ring is spherical, so they can compensate for misalignment. They are available with rubber seals on both sides.
Datatable
Items 1 - 7 of 7

Image may differ.
Item features:
Material composition and design allow high loads.
Roller bearing generates little noise during operation.
Roller bearing is slightly stiff due to friction from seals or grease.
The material used can begin to rust if it comes into contact with fresh water.
Article is only suitable for rather low speeds.
The seal used protects the rolling bearing from the ingress of very small particles.
  • Delivery time: Available

  • from 4 pcs per 3,30 €
  • from 10 pcs per 3,06 €
  • from 50 pcs per 2,93 €
  • from 200 pcs per 2,83 €
  • from 1000 pcs per 2,74 €
4,71 € *
incl. 19% VAT , plus shipping charge
Image may differ.
Track Roller LR604 2RS TN 4x13x4 mm
Item number: LR604-2RS-TN Item number pre- & suffixes
Item features:
Material composition and design allow high loads.
Roller bearing generates little noise during operation.
Roller bearing is slightly stiff due to friction from seals or grease.
The material used can begin to rust if it comes into contact with fresh water.
Article is only suitable for rather low speeds.
The seal used protects the rolling bearing from the ingress of very small particles.
  • Delivery time: Available

  • from 4 pcs per 3,30 €
  • from 10 pcs per 3,06 €
  • from 50 pcs per 2,93 €
  • from 200 pcs per 2,83 €
  • from 1000 pcs per 2,74 €
4,71 € *
incl. 19% VAT , plus shipping charge
Image may differ.
Item features:
Material composition and design allow high loads.
Roller bearing generates little noise during operation.
Roller bearing is slightly stiff due to friction from seals or grease.
The material used can begin to rust if it comes into contact with fresh water.
Article is only suitable for rather low speeds.
The seal used protects the rolling bearing from the ingress of very small particles.
  • Delivery time: Available

  • from 4 pcs per 3,49 €
  • from 10 pcs per 3,24 €
  • from 50 pcs per 3,09 €
  • from 200 pcs per 2,99 €
  • from 1000 pcs per 2,89 €
4,99 € *
incl. 19% VAT , plus shipping charge
Image may differ.
Item features:
Material composition and design allow high loads.
Roller bearing generates little noise during operation.
Roller bearing is slightly stiff due to friction from seals or grease.
The material used can begin to rust if it comes into contact with fresh water.
Article is only suitable for rather low speeds.
The seal used protects the rolling bearing from the ingress of very small particles.
  • Delivery time: Available

  • from 4 pcs per 3,87 €
  • from 10 pcs per 3,59 €
  • from 50 pcs per 3,43 €
  • from 200 pcs per 3,31 €
  • from 1000 pcs per 3,20 €
5,52 € *
incl. 19% VAT , plus shipping charge
Image may differ.
Track Roller LR606 2RS TN 6x19x6 mm
Item number: LR606-2RS-TN Item number pre- & suffixes
Item features:
Material composition and design allow high loads.
Roller bearing generates little noise during operation.
Roller bearing is slightly stiff due to friction from seals or grease.
The material used can begin to rust if it comes into contact with fresh water.
Article is only suitable for rather low speeds.
The seal used protects the rolling bearing from the ingress of very small particles.
  • Delivery time: Available

  • from 4 pcs per 3,87 €
  • from 10 pcs per 3,59 €
  • from 50 pcs per 3,43 €
  • from 200 pcs per 3,31 €
  • from 1000 pcs per 3,20 €
5,52 € *
incl. 19% VAT , plus shipping charge
Image may differ.
Item features:
Material composition and design allow high loads.
Roller bearing generates little noise during operation.
Roller bearing is slightly stiff due to friction from seals or grease.
The material used can begin to rust if it comes into contact with fresh water.
Article is only suitable for rather low speeds.
The seal used protects the rolling bearing from the ingress of very small particles.
  • Delivery time: Available

  • from 4 pcs per 4,24 €
  • from 10 pcs per 3,94 €
  • from 50 pcs per 3,76 €
  • from 200 pcs per 3,63 €
  • from 1000 pcs per 3,51 €
6,06 € *
incl. 19% VAT , plus shipping charge
Image may differ.
Item features:
Material composition and design allow high loads.
Roller bearing generates little noise during operation.
Roller bearing is slightly stiff due to friction from seals or grease.
The material used can begin to rust if it comes into contact with fresh water.
Article is only suitable for rather low speeds.
The seal used protects the rolling bearing from the ingress of very small particles.
  • Delivery time: Available

  • from 4 pcs per 4,43 €
  • from 10 pcs per 4,11 €
  • from 50 pcs per 3,92 €
  • from 200 pcs per 3,80 €
  • from 1000 pcs per 3,67 €
6,32 € *
incl. 19% VAT , plus shipping charge
Items 1 - 7 of 7