Radial Insert Ball Bearing SA210 RST - Shaft: 50 mm
Item number:
SA210-RST
Item features:
The bearing insert SA210 RST can be easily attached to the shaft with the aid of the eccentric ring or inserted in a housing. It is suitable for radial loads. Main dimensions according to DIN 626-1.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 50 |
Outside Ø (mm): | 90 |
Width (mm): | 20 |
Width Extended Inner Ring (mm): | 43.7 |
Extended Inner Ring: | one side |
Tolerance for inside-Ø (mm): | 0,021/0 |
Tolerance for outside-Ø (mm): | 0/-0,015 |
Tolerance for width (mm): | 0/-0,12 |
Seal: | RST |
Recommended tightening torque for shaft fastener (Nm): | 11 |
Grub Screw: | M8 |
Cage Material: | Sheet Steel |
Lifetime lubricated: | yes |
Magnetic: | yes |
Norm: | DIN 626-1 |
Ring Material: | Rolling Bearing Steel |
Type of lubrication: | greased |
Shaft Fastening: | Eccentric Collar |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
Rolling Element Material: | Rolling Bearing Steel |
min. Operating Temperature: | -20°C |
Item weight: | 0,77 kg |
Features
- is fastened with eccentric ring and grub screws on the shaft
- suitable for mounting in a housing bearing
- suitable for high loads
- suitable for high speeds with the same direction of rotation
- the spherical outer surface of the outer ring can compensate misalignment if it is installed in a corresponding housing
- Seal: Contact seal on both sides made of a profiled sheet steel disc with an integrated rubber contact lip for a high level of protection against dirt.
- lubricated for life; under normal operating conditions relubrication is not required
- comparable with: YET210 (SKF), GRAE50 (FAG), 16210, EN210 (NSK), AEL210 (NTN)
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.