Miniature Deep Groove Ball Bearings of the series 6-V (Full Complement Ball Set)

Special feature of this series: Main dimensions according to DIN 625-1. Miniature deep groove ball bearings of the series 6-V have a full complement ball set and no cage. Due to the greatest possible quantity of balls, they can thus be loaded higher than similar miniature deep groove ball bearings with cage. They are comparatively small and therefore they are suitable for relatively thin shafts and axis as well as for appropriate small space requirements. Their touching plastic seals (2RS) have the best possible seal effect in case of elevated friction. | more

Full Complement Ball Set Bearing 605 V (MAX) 2RS GD1...

Image may differ.

Full Complement Ball Set Bearing 605 V (MAX) 2RS GD1 5x14x5 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 4,03 €
from 10 pcs per 3,78 €
from 50 pcs per 3,53 €
from 200 pcs per 3,38 €
from 1000 pcs per 3,28 €

5,05 €

incl. 19% VAT , plus

Full Complement Ball Set Bearing 608 V (MAX) 2RS GD1...

Image may differ.

Full Complement Ball Set Bearing 608 V (MAX) 2RS GD1 8x22x7 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 4,06 €
from 10 pcs per 3,81 €
from 50 pcs per 3,55 €
from 200 pcs per 3,39 €
from 1000 pcs per 3,30 €

5,07 €

incl. 19% VAT , plus

Full Complement Ball Set Bearing 688 V (MAX) 2RS GD1...

Image may differ.

Full Complement Ball Set Bearing 688 V (MAX) 2RS GD1 8x16x5 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 4,22 €
from 10 pcs per 3,96 €
from 50 pcs per 3,70 €
from 200 pcs per 3,53 €
from 1000 pcs per 3,44 €

5,28 €

incl. 19% VAT , plus

Full Complement Ball Set Bearing 698 V (MAX) 2RS GD1...

Image may differ.

Full Complement Ball Set Bearing 698 V (MAX) 2RS GD1 8x19x6 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 4,13 €
from 10 pcs per 3,88 €
from 50 pcs per 3,62 €
from 200 pcs per 3,46 €
from 1000 pcs per 3,36 €

5,16 €

incl. 19% VAT , plus

Items 1 - 4 of 4

FILTER

Reset all filters

Special design of the ball bearing

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Accuracy of main dimensions (inner diameter, outer diameter and width). P0 is the standard tolerance class, P6 and especially P5 are a bit more precise.

The bearing clearance is the amount by which the two rings of a non-installed roller bearing can be displaced in relation to one another. There are different internal clearance classes. CN is "normal internal clearance" and is the best choice for many applications. C3, C4, ... indicates increased clearance. C2, C1, ... stands for reduced clearance.

Type of sealing of the bearing to protect it from contamination.

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material from which the bearing seal is made.

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.

Lubricant used in a rolling bearing

Area in which the rolling bearing is used

Some materials used for rolling bearings are magnetic.

Miniature Deep Groove Ball Bearings of the series 6-V (Full Complement Ball Set)

Filters and sort order