Miniature Deep Groove Ball Bearings of the series SS-6-V (Full Complement Ball Set)

Special feature of this series: Main dimensions according to DIN 625-1. Miniature deep groove ball bearings of the series SS-6-V have a full complement ball set and no cage. Due to the greatest possible quantity of balls, they can thus be loaded higher than similar miniature deep groove ball bearings with cage. They are comparatively small and therefore they are suitable for relatively thin shafts and axis as well as for appropriate small space requirements. Their touching plastic seals (2RS) have the best possible seal effect in case of elevated friction. They are corrosion resistant. | more

Full Complement Stainless Steel Miniature Deep Groove...

Image may differ.

Full Complement Stainless Steel Miniature Deep Groove Ball Bearing SS 688 V (MAX) 2RS GD1 8x16x5 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 5,40 €
from 10 pcs per 4,95 €
from 50 pcs per 4,56 €
from 200 pcs per 4,31 €
from 500 pcs per 4,05 €

6,43 €

incl. 19% VAT , plus

Image may differ.

Full Complement Stainless Steel Miniature Deep Groove Ball Bearing SS 698 V (MAX) 2RS GD1 8x19x6 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 5,40 €
from 10 pcs per 4,95 €
from 50 pcs per 4,56 €
from 200 pcs per 4,31 €
from 500 pcs per 4,05 €

6,43 €

incl. 19% VAT , plus

Image may differ.

Full Complement Stainless Steel Miniature Deep Groove Ball Bearing SS 608 V (MAX) 2RS GD1 8x22x7 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 5,40 €
from 10 pcs per 4,95 €
from 50 pcs per 4,56 €
from 200 pcs per 4,31 €
from 500 pcs per 4,05 €

6,43 €

incl. 19% VAT , plus

Items 1 - 3 of 3

FILTER

Reset all filters

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Flanges are used for an axial fixing

These bearings have a groove and snap ring for axial securement.

An extended inner ring is wider than the outer ring of the article.

Rolling bearings can be single row or double row. Double row rolling bearings can support higher loads.

Bore design, either cylindrical or conical (1:12)

Ball bearings are also available in full complement versions. Full complement versions have significantly more balls, which means that higher loads can be supported.

Accuracy of main dimensions (inner diameter, outer diameter and width). P0 is the standard tolerance class, P6 and especially P5 are a bit more precise.

The bearing clearance is the amount by which the two rings of a non-installed roller bearing can be displaced in relation to one another. There are different internal clearance classes. CN is "normal internal clearance" and is the best choice for many applications. C3, C4, ... indicates increased clearance. C2, C1, ... stands for reduced clearance.

Type of sealing of the bearing to protect it from contamination.

Material from which the bearing seal is made.

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.

These bearings are lubricated for the expected service life and do not require relubrication.

Some materials used for rolling bearings are magnetic.

Miniature Deep Groove Ball Bearings of the series SS-6-V (Full Complement Ball Set)

Filters and sort order