Pillow block bearing sets of the series UCPP2 (Sheet Steel)

Special feature of this series: Pillow block bearing sets of the series UCPP2 consist of an inexpensive, lightweight sheet steel housing PP2 and a separate bearing insert UC2 with extended inner ring and grub screws for fixing the inner ring on a shaft. Static misalignments can be compensated up to an angle of 5°. The pillow block housing is suitable for mounting on flat surfaces and high radial load capacities. The housing is made of sheet steel and is thus suitable for space-saving installations. The galvanized surface has a positive effect on corrosion resistance.

Image may differ.

Pillow Block Unit UCPP201 as a Set Comprising Bearing Insert UC201 and Pillow Block Housing PP204 - Shaft: 12 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 8,79 €
from 10 pcs per 8,52 €
from 50 pcs per 8,15 €
from 200 pcs per 7,96 €
from 500 pcs per 7,78 €

9,26 € *

incl. 19% VAT , plus (Standard)

Image may differ.

Pillow Block Unit UCPP202 as a Set Comprising Bearing Insert UC202 and Pillow Block Housing PP204 - Shaft: 15 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 8,51 €
from 10 pcs per 8,25 €
from 50 pcs per 7,89 €
from 200 pcs per 7,71 €
from 500 pcs per 7,53 €

8,96 € *

incl. 19% VAT , plus (Standard)

Image may differ.

Pillow Block Unit UCPP203 as a Set Comprising Bearing Insert UC203 and Pillow Block Housing PP204 - Shaft: 17 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 8,31 €
from 10 pcs per 8,04 €
from 50 pcs per 7,70 €
from 200 pcs per 7,52 €
from 500 pcs per 7,34 €

8,75 € *

incl. 19% VAT , plus (Standard)

Image may differ.

Pillow Block Unit UCPP204 as a Set Comprising Bearing Insert UC204 and Pillow Block Housing PP204 - Shaft: 20 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 8,15 €
from 10 pcs per 7,89 €
from 50 pcs per 7,54 €
from 200 pcs per 7,38 €
from 500 pcs per 7,21 €

8,58 € *

incl. 19% VAT , plus (Standard)

Image may differ.

Pillow Block Unit UCPP205 as a Set Comprising Bearing Insert UC205 and Pillow Block Housing PP205 - Shaft: 25 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 9,78 €
from 10 pcs per 9,47 €
from 50 pcs per 9,06 €
from 200 pcs per 8,85 €
from 500 pcs per 8,65 €

10,29 € *

incl. 19% VAT , plus (Standard)

Image may differ.

Pillow Block Unit UCPP206 as a Set Comprising Bearing Insert UC206 and Pillow Block Housing PP206 - Shaft: 30 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 10,44 €
from 10 pcs per 10,10 €
from 50 pcs per 9,66 €
from 200 pcs per 9,45 €
from 500 pcs per 9,22 €

10,98 € *

incl. 19% VAT , plus (Standard)

Image may differ.

Pillow Block Unit UCPP207 as a Set Comprising Bearing Insert UC207 and Pillow Block Housing PP207 - Shaft: 35 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 12,57 €
from 10 pcs per 12,17 €
from 50 pcs per 11,65 €
from 200 pcs per 11,38 €
from 500 pcs per 11,11 €

13,23 € *

incl. 19% VAT , plus (Standard)

Items 1 - 7 of 7

FILTER

Reset all filters

Plummer Block Housing Units
Flanged Housing Units
Take-up Housing Units

The way, the shaft is fixed with the bearing insert.

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Type of sealing of the bearing to protect it from contamination.

Article number of the bearing insert for housing bearings.

Article number of the housing. The shape and size of the housing can be derived from this.

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Material from which the housing is made.

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.

These bearings are lubricated for the expected service life and do not require relubrication.

Number of holes that can be used to fix the housing

The fastening screw should be tightened with this tightening torque so that the shaft is sufficiently tight.

Thread size of the fastening screw for the shaft tightening.