Single Row Angular Ball Bearings of the Series SS73 (Stainless Stell)

Special feature of this series: Main dimensions according to DIN 628-1. Angular ball bearings of the light series 72 are corrosion-resistant. They withstand considerably larger loads than angular ball bearings of the series 72 with the same inner diameter. But on the other hand they have a larger outer diameter and are slightly wider.

Image may differ.

Stainless Steel Angular Ball Bearing SS 7303 B open TN 17x47x14 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 23,92 €
from 10 pcs per 22,66 €
from 50 pcs per 22,16 €
from 200 pcs per 21,66 €
from 500 pcs per 20,15 €

25,18 €

incl. 19% VAT , plus

Image may differ.

Stainless Steel Angular Ball Bearing SS 7304 B open TN 20x52x15 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 32,93 €
from 10 pcs per 31,20 €
from 50 pcs per 30,50 €
from 200 pcs per 29,81 €
from 500 pcs per 27,73 €

34,66 €

incl. 19% VAT , plus

Image may differ.

Stainless Steel Angular Ball Bearing SS 7305 B open TN 25x62x17 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 44,32 €
from 10 pcs per 41,98 €
from 50 pcs per 41,06 €
from 200 pcs per 40,11 €
from 500 pcs per 37,32 €

46,65 €

incl. 19% VAT , plus

Items 1 - 3 of 3

FILTER

Reset all filters

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

An extended inner ring is wider than the outer ring of the article.

Rolling bearings can be single row or double row. Double row rolling bearings can support higher loads.

Bore design, either cylindrical or conical (1:12)

Ball bearings are also available in full complement versions. Full complement versions have significantly more balls, which means that higher loads can be supported.

Accuracy of main dimensions (inner diameter, outer diameter and width). P0 is the standard tolerance class, P6 and especially P5 are a bit more precise.

Type of sealing of the bearing to protect it from contamination.

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.

These bearings are lubricated for the expected service life and do not require relubrication.

Some materials used for rolling bearings are magnetic.

Single Row Angular Ball Bearings of the Series SS73 (Stainless Stell)

Filters and sort order