Flange bearing sets of the series SAPFT2 (Sheet Steel)

Special feature of this series: Flange bearing sets of the series SAPFT2 consist of an inexpensive, lightweight sheet steel housing PFT2 and a separate bearing insert SA2 with eccentric ring and grub screws for mounting the inner ring on a shaft. The bearing inner ring is extended on one side. Static misalignments can be compensated up to an angle of 5°. The design as a 3-hole flange bearing design allows installation in a variety of applications and is suitable for high radial loads. The housing is made of sheet steel and is thus suitable for space-saving installations. The galvanized surface has a positive effect on corrosion resistance.

Image may differ.

Flange Housing Unit SAPFT201 as a Set Comprising Bearing Insert SA201 2RS and Flange Housing PFT203 - Shaft: 12 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 10,44 €
from 10 pcs per 10,10 €
from 50 pcs per 9,66 €
from 200 pcs per 9,45 €
from 500 pcs per 9,22 €

10,98 € *

incl. 19% VAT , plus (Standard)

Image may differ.

Flange Housing Unit SAPFT202 as a Set Comprising Bearing Insert SA202 2RS and Flange Housing PFT204 - Shaft: 15 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 10,27 €
from 10 pcs per 9,94 €
from 50 pcs per 9,51 €
from 200 pcs per 9,29 €
from 500 pcs per 9,08 €

10,81 € *

incl. 19% VAT , plus (Standard)

Image may differ.

Flange Housing Unit SAPFT203 as a Set Comprising Bearing Insert SA203 2RS and Flange Housing PFT204 - Shaft: 17 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 9,92 €
from 10 pcs per 9,62 €
from 50 pcs per 9,20 €
from 200 pcs per 8,98 €
from 500 pcs per 8,78 €

10,45 € *

incl. 19% VAT , plus (Standard)

Image may differ.

Flange Housing Unit SAPFT204 as a Set Comprising Bearing Insert SA204 2RS and Flange Housing PFT204 - Shaft: 20 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 9,59 €
from 10 pcs per 9,28 €
from 50 pcs per 8,88 €
from 200 pcs per 8,68 €
from 500 pcs per 8,47 €

10,09 € *

incl. 19% VAT , plus (Standard)

Image may differ.

Flange Housing Unit SAPFT205 as a Set Comprising Bearing Insert SA205 2RS and Flange Housing PFT205 - Shaft: 25 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 10,94 €
from 10 pcs per 10,59 €
from 50 pcs per 10,13 €
from 200 pcs per 9,90 €
from 500 pcs per 9,66 €

11,51 € *

incl. 19% VAT , plus (Standard)

Image may differ.

Flange Housing Unit SAPFT206 as a Set Comprising Bearing Insert SA206 2RS and Flange Housing PFT206 - Shaft: 30 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 15,22 €
from 10 pcs per 14,73 €
from 50 pcs per 14,09 €
from 200 pcs per 13,78 €
from 500 pcs per 13,46 €

16,02 € *

incl. 19% VAT , plus (Standard)

Image may differ.

Flange Housing Unit SAPFT207 as a Set Comprising Bearing Insert SA207 2RS and Flange Housing PFT207 - Shaft: 35 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 18,68 €
from 10 pcs per 18,10 €
from 50 pcs per 17,31 €
from 200 pcs per 16,92 €
from 500 pcs per 16,53 €

19,67 € *

incl. 19% VAT , plus (Standard)

Items 1 - 7 of 7

FILTER

Reset all filters

Plummer Block Housing Units
Flanged Housing Units
Take-up Housing Units

The way, the shaft is fixed with the bearing insert.

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Type of sealing of the bearing to protect it from contamination.

Article number of the bearing insert for housing bearings.

Article number of the housing. The shape and size of the housing can be derived from this.

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Material from which the housing is made.

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.

These bearings are lubricated for the expected service life and do not require relubrication.

Number of holes that can be used to fix the housing

The fastening screw should be tightened with this tightening torque so that the shaft is sufficiently tight.

Thread size of the fastening screw for the shaft tightening.