Englisch
Deutsch
Deep Groove Ball Bearing with a Flanged Outer Ring F 6804 / F61804 2RS 20x32x7 mm
Item number:
F-6804-2RS
Item features:
Very narrow, very light and with extremely good spinning characteristics. The deep groove ball bearing F-6804-2RS is very narrow and can also be used with limited space. The low weight allows for extremely high speeds. With the flange, it can be fixed axially, e.g. in bore holes.
Technical Scribble
Technical Data
| Inside Ø (mm): | 20 |
| Outside Ø (mm): | 32 |
| Width (mm): | 7 |
| Flange Ø (mm): | 35 |
| Static radial load rating (N): | 2390 |
| Dynamic radial load rating (N): | 4020 |
| Limiting speed (1/min): | 16800 |
| max. Operating Temperature: | +100°C (briefly up to +120°C) |
| min. Operating Temperature: | -20°C |
| Tolerance for inside Ø (mm): | 0/-0,01 |
| Tolerance for outside Ø (mm): | 0/-0,011 |
| Tolerance for width (mm): | 0/-0,12 |
| Tolerance for flange-outside-Ø (mm): | 0,39/-0,062 |
| Bore: | cylindrical |
| Extended Inner Ring: | no |
| Tolerance Class: | ABEC 1 / P0 |
| Internal Clearance: | CN (Standard) |
| Noise and vibration testing: | Class V |
| Seal: | 2RS |
| Seal Colour: | Black |
| Ring Material: | Rolling Bearing Steel |
| Rolling Element Material: | Rolling Bearing Steel |
| Cage Material: | Sheet Steel |
| Sealing material: | NBR |
| Type of lubrication: | greased |
| Lifetime lubricated: | yes |
| Magnetic: | yes |
| Norm: | DIN 625-1 |
| Item weight: | 18 g |
Features
- the flange on the outer ring prevents axial displacements
- thin section bearing with very thin cross section
- suitable for space-saving installation in radial and axial directions
- suitable for very high speeds compared to deep groove ball bearings with a larger cross section
- extra light series with compact dimensions and low weight
- suitable for radial loads and light axial loads in both directions
- offers high running accuracy, quiet running and very high speeds
- seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)
Further Information
- What does radial and axial load capacity mean?
- Fit recommendations for mounting
- Info sheet ball bearing
- Information about ball bearing seals
- Internal clearance and operating clearance
- Comparison list of roller bearings
- Comparison of features of roller bearings
- How do I clean my bearings?
- How do I grease or oil my bearings?
- How do I remove a sealing washer or cover plate?
Manufacturer information
Quasi-ManufacturerKugellager-Express GmbH
Grenzweg 14a
33758 Schloß Holte-Stukenbrock
Germany