

Deep Groove Ball Bearing 6202 RS 15x35x11 mm
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 15 |
Outside Ø (mm): | 35 |
Width (mm): | 11 |
Tolerance for inside-Ø (mm): | 0/-0,008 |
Tolerance for outside-Ø (mm): | 0/-0,011 |
Tolerance for width (mm): | 0/-0,12 |
Seal: | RS |
Internal Clearance: | CN (Standard) |
Slot and Snap Ring: | no |
Flange: | no |
Ring Material: | Rolling Bearing Steel |
Rolling Element Material: | Rolling Bearing Steel |
Cage Material: | Sheet Steel |
Full Complement Ball Set: | no |
Rows of Rolling Elements: | single row |
Tolerance Class: | ABEC 1 / P0 |
Magnetic: | yes |
Type of lubrication: | greased |
Item weight: | 45 g |
Features
- light series with compact dimensions and low weight
- can carry relatively high radial loads despite low weight
- suitable for high radial loads and light axial loads in both directions
- offers high running accuracy, quiet running and high speeds
- seal: contact lip seal on one side made of rubber (RS) for high sealing effect
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)
Further Information
- What does radial and axial load capacity mean?
- Fit recommendations for mounting
- Info sheet ball bearing
- Information about ball bearing seals
- Internal clearance and operating clearance
- Comparison list of roller bearings
- Comparison of features of roller bearings
- How do I clean my bearings?
- How do I grease or oil my bearings?
- How do I remove a sealing washer or cover plate?