Track Roller With Profiled Outer Ring LFR5201 12 2RS TN 12x35x15.9 mm
Item number:
LFR5201-12-2RS-TN
Item features:
The track roller LFR5201-12-2RS-TN (NPPU) with profiled outer ring has a raceway groove in the outer ring, which allows it to roll on a round profiled mating track. It is based on a double row angular ball bearing and is radially and axially highly resilient.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 12 |
Outside Ø (mm): | 35 |
Width (mm): | 15.9 |
Tolerance for inside-Ø (mm): | 0/-0,008 |
Tolerance for outside-Ø (mm): | 0/-0,011 |
Tolerance for width (mm): | 0/-0,12 |
Profile Form Outer Ring: | Gothic |
Seal: | 2RS |
Ring Material: | Rolling Bearing Steel |
Rolling Element Material: | Rolling Bearing Steel |
Cage Material: | Plastic |
Type of lubrication: | greased |
Application: | Conveyor technology |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
min. Operating Temperature: | -40°C |
Magnetic: | yes |
Norm: | ISO 15 |
Item weight: | 68 g |
Features
- it consists of a thick-walled outer ring with a gothic profiled raceway which results in a 2-point contact in the contact zone to the raceway
- the inner ring and two ball-cage assemblies with plastic cages are similar to a double row angular ball bearing and can be mounted on an axis
- supports either high radial or high axial forces in both directions
- cage material: plastic; the low weight and the elasticity of the plastic have a positive effect on the sliding and emergency running properties as well as the shock resistance; suitable for quiet running
- seal: contact lip seal on both sides made of rubber (2RS) (former NPPU) for high sealing effect
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.