Stainless Steel Radial Insert Ball Bearing SS UC205 - Shaft: 25 mm
Item number:
SS-UC205
Item features:
The stainless steel bearing insert SS-UC205 can be easily attached to the shaft with the grub screws or inserted in a housing. It is suitable for radial loads and is resistant to corrosion. Main dimensions according to DIN 626-1.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 25 |
Outside Ø (mm): | 52 |
Width (mm): | 17 |
Width Extended Inner Ring (mm): | 34 |
Tolerance for inside-Ø (mm): | 0,018/0 |
Tolerance for outside-Ø (mm): | 0/-0,013 |
Tolerance for width (mm): | 0/-0,12 |
Extended Inner Ring: | both sides |
Shaft Fastening: | Grub Screws |
Ring Material: | Stainless Steel |
Rolling Element Material: | Stainless Steel |
Cage Material: | Stainless Steel |
Type of lubrication: | greased |
Lifetime lubricated: | yes |
Recommended tightening torque for shaft fastener (Nm): | 5 |
Grub Screw: | M6 |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
min. Operating Temperature: | -20°C |
Magnetic: | yes |
Norm: | DIN 626-1 |
Item weight: | 0,20 kg |
Features
- with extended inner ring and grub screws for fixing the inner ring on a shaft
- suitable for mounting in a housing bearing
- suitable for high loads
- all components are made of stainless steel: the radial insert ball bearing is therefore corrosion resistant and hygienic
- smooth running and good behavior with tilting due to the extended inner ring
- the spherical outer surface of the outer ring can compensate misalignment if it is installed in a corresponding housing
- two-piece sealing system: with washer made of stainless steel reinforced rubber seal inside; outside additionally with upstream slinger made of stainless steel for high mechanical protection against foreign matter
- lubricated for life; under normal operating conditions relubrication is not required
- comparable with: GYE25 (FAG), 56205, YAR205 (SKF), FB205
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.
Further Information
- What does radial and axial load capacity mean?
- Fit recommendations for mounting
- Axial load capacity of radial insert ball bearings
- Housing bearing information sheet
- Tightening torques insert bearings
- Comparison of features of roller bearings
- Are bearings made of stainless steel 100 per cent corrosion-resistant?
- Can bearings made of stainless steel be magnetic?