Split Pillow Block Housing SNL210 / Discontinued Shaft: 60 / 50 mm
Item number: SNL210
The divisible housing SNL210 is made out of die-cast and designed for the use of self-aligning ball bearings and spherical roller bearings.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 50 |
Inside Ø Seal (mm): | 60 |
Tolerance for inside-Ø (mm): | 0/-0,012 |
Tolerance for width (mm): | 0/-0,12 |
Housing Material: | Cast Iron |
max. Operating Temperature: | +100°C+120°C |
min. Operating Temperature: | -20°C-40°C |
Norm: | ISO 113 |
Item weight: | 3,00 kg |
Features
- Pillow Block housing in split design
- can be combined with a self-aligning ball bearing or spherical roller bearing
- the housing base is reinforced around of the fastening holes and additonally strengthened with rips, so there is no deformation during fastening of the housing; a centring attachment helps with the exact alignment; case cover and base belong together and are not interchangeable
- the seal kit TG (double lip seal) is contained in the scope of delivery
- with lubrication nipple for easy re-lubrication of the bearing insert
- to protect against corrosion, the housing is painted; the mounting surface is treated with corrosion protection oil
- An inner ring can be used as a sleeve for the shaft: possible inner rings
- additional bearing inserts, locating rings and adapter sleeves can be seen in the following table
Complimentary Items
INSERT BEARINGS WITH CYLINDRICAL BORE