Englisch
Deutsch
Stainless Steel Self-Aligning Ball Bearing SS 2210 2RS 50x90x23 mm
Item number:
SS-2210-2RS
Item features:
With the swiveling inner ring, the stainless steel self aligning ball bearing SS-2210-2RS offers excellent alignment error compensation. With the two rings of barrel-shaped rollers, it can absorb high radial forces. It is resistant to corrosion. Main dimensions according to DIN 630.
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 50 |
| Outside Ø (mm): | 90 |
| Width (mm): | 23 |
| Tolerance for inside-Ø (mm): | 0/-0,012 |
| Tolerance for outside-Ø (mm): | 0/-0,015 |
| Tolerance for width (mm): | 0/-0,12 |
| Bore: | cylindrical |
| Extended Inner Ring: | no |
| Seal: | 2RS |
| Sealing material: | NBR |
| Ring Material: | Stainless Steel |
| Rolling Element Material: | Stainless Steel |
| Cage Material: | Stainless Steel |
| Type of lubrication: | greased |
| Lifetime lubricated: | yes |
| Internal Clearance: | CN (Standard) |
| Tolerance Class: | ABEC 1 / P0 |
| max. Operating Temperature: | +100°C (briefly up to +120°C) |
| min. Operating Temperature: | -20°C |
| Permissible angular misalignment: | 2.5° |
| Magnetic: | yes |
| Norm: | DIN 630 |
| Item weight: | 0,59 kg |
Features
- all components are made of stainless steel: the self-aligning ball bearing is therefore corrosion resistant and hygienic
- self-aligning ball bearing with two rows of balls
- pivoting inner ring, misalignments and shaft deflections can be compensated
- suitable for high radial loads and light axial loads in both directions
- cage material: stainless steel; corrosion resistant and suitable for continuous high temperatures
- seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)
Further Information
- What does radial and axial load capacity mean?
- Fit recommendations for mounting
- Information about ball bearing seals
- Comparison list of roller bearings
- Comparison of features of roller bearings
- How do I clean my bearings?
- How do I grease or oil my bearings?
- Are bearings made of stainless steel 100 per cent corrosion-resistant?
- Can bearings made of stainless steel be magnetic?
- How do I remove a sealing washer or cover plate?