Radial-Spherical Plain Bearing - Maintenance Free GE180ET 2RS 180x260x105 mm
Item number:
GE180ET-2RS
The maintenance-free spherical plain radial bearing GE180ET-2RS with seals on both sides is suitable for loads where low friction is needed. It has a sliding contact surface combination hard chrome/PTFE. The main dimensions correspond to DIN ISO 12240-1 - dimension series E (DIN = German industrial norm).
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 180 |
Outside Ø (mm): | 260 |
Width (mm): | 105 |
Tolerance for inside-Ø (mm): | 0/-0,025 |
Tolerance for outside-Ø (mm): | 0/-0,7 |
Tolerance for width (mm): | 0/-0,25 |
Maintenance: | Maintenance Free |
Seal: | 2RS |
Ring Material: | Rolling Bearing Steel |
Sliding Contact Surface Combination: | PTFE/chrome steel |
Type of lubrication: | oiled |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
min. Operating Temperature: | -30°C |
Norm: | DIN ISO 12240-1 |
Item weight: | 18,50 kg |
Features
- suitable for heavy, radial loads with constant direction, where low friction is required as well as for low axial loads
- also suitable for moderate alternating loads and shock loads
- seal: lip seal on both sides (2RS)
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- material of the bearing shell: chrome steel with PTFE-lining
- material of the inner ring: chrome steel (100Cr6), hardened, polished, hard chrome-plated
- comparable with: GE180-UK-2RS (INA), GE 180 ET-2RS (SKF)
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.