Englisch
Deutsch
Pillow Block Unit SBPP206 as a Set Comprising Bearing Insert SB206 2RS and Pillow Block Housing PP206 - Shaft: 30 mm
Item number:
SBPP206-Set
Item features:
The housing bearing unit SBPP206 as a set includes the housing PP206 and the single row radial insert ball bearing SB206-2RS (shaft: 30 mm). The set components are coordinated with each other so that they can be mounted directly. The set is suitable for high radial loads. The set SBPP206 is comparable with: PBY30 (INA), UBPP206 (NSK) or LPB30A (RHP).
Set Components
Technical Data
| Inside Ø (mm): | 30 |
| Tolerance for inside-Ø (mm): | 0,018/0 |
| Housing Type: | Plummer block bearing |
| Shaft Fastening: | Grub Screws |
| Number of Mounting Holes: | 2 |
| Seal: | 2RS |
| Ring Material: | Rolling Bearing Steel |
| Rolling Element Material: | Rolling Bearing Steel |
| Housing Material: | galvanized Sheet Steel |
| Cage Material: | Sheet Steel |
| Type of lubrication: | greased |
| Lifetime lubricated: | yes |
| Recommended tightening torque for shaft fastener (Nm): | 5 |
| Bearing No.: | SB 206 |
| Housing No.: | PP 206 |
| Grub Screw: | M6 |
| max. Operating Temperature: | +100°C (briefly up to +120°C) |
| min. Operating Temperature: | -20°C |
| Norm: | DIN 626-2 |
| Item weight: | 0,44 kg |
Features
Pillow block housing
Bearing insert / Radial insert ball bearing
In addition to this set, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.
- the housing is made of sheet steel and is thus suitable for space-saving installations
- increased corrosion resistance due to galvanized sheet steel
- housing with long base for mounting on flat surfaces
- low weight
The bearing insert is comparable with YAT206 (SKF), UB206 (NSK), AS206 (NTN), GAY30 (FAG).
- with extended inner ring and grub screws (pre-assembled) for fastening the inner ring on a shaft
- smooth running and good behavior in case of tilting due to the extended inner ring
- the compensation of static misalignments is possible up to an angle of 2° due to the spherical outer surface of the outer ring
- seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
- lubricated for life; under normal operating conditions, relubrication is not necessary