Pillow Block Unit UCPP207 as a Set Comprising Bearing Insert UC207 and Pillow Block Housing PP207 - Shaft: 35 mm
Item number:
UCPP207-Set
Item features:
The housing bearing unit UCPP207 as a set includes the housing PP207 and the single row radial insert ball bearing UC207 (shaft: 35 mm). The set components are coordinated with each other so that they can be mounted directly. The set is suitable for high radial loads. The set UCPP207 is comparable with: LPB35 (RHP).
Set Components
Technical Data
Inside Ø (mm): | 35 |
Housing Type: | Plummer block bearing |
Tolerance for inside-Ø (mm): | 0,021/0 |
Number of Mounting Holes: | 2 |
Seal: | 2-peace sealing system |
Recommended tightening torque for shaft fastener (Nm): | 11 |
Housing Material: | galvanized Sheet Steel |
Housing No.: | PP 207 |
Grub Screw: | M8 |
Cage Material: | Sheet Steel |
Bearing No.: | UC 207 |
Lifetime lubricated: | yes |
Norm: | DIN 626-2 |
Ring Material: | Rolling Bearing Steel |
Type of lubrication: | greased |
Shaft Fastening: | Grub Screws |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
Rolling Element Material: | Rolling Bearing Steel |
min. Operating Temperature: | -20°C |
Item weight: | 0,72 kg |
Features
Pillow block housing
- the housing is made of sheet steel and is thus suitable for space-saving installations
- increased corrosion resistance due to galvanized sheet steel
- housing with long base for mounting on flat surfaces
- low weight
- with an inner ring extended on both sides and grub screws (pre-assembled) for fastening the inner ring on a shaft
- smooth running and good behavior in case of tilting due to the extended inner ring
- the compensation of static misalignments is possible up to an angle of 5° due to the spherical outer surface of the outer ring
- two-piece sealing system: with sheet steel washer reinforced rubber seal inside; outside additionally with upstream slinger made of sheet steel for high mechanical protection against foreign matter
- lubricated for life; under normal operating conditions, relubrication is not necessary
Bearing insert / Radial insert ball bearing
The bearing insert is comparable with GYE35 (FAG), 56207, YAR207 (SKF), FB207.
In addition to this set, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.