Pillow Block Unit UCPP203 as a Set Comprising Bearing Insert UC203 and Pillow Block Housing PP204 - Shaft: 17 mm
Item number:
UCPP203-Set
Item features:
The housing bearing unit UCPP203 as a set includes the housing PP204 and the single row radial insert ball bearing UC203 (shaft: 17 mm). The set components are coordinated with each other so that they can be mounted directly. The set is suitable for high radial loads. The set UCPP203 is comparable with: RBY17 (INA) or LPB17 (RHP).
Set Components
Technical Data
Inside Ø (mm): | 17 |
Tolerance for inside-Ø (mm): | 0,015/0 |
Housing Type: | Plummer block bearing |
Shaft Fastening: | Grub Screws |
Number of Mounting Holes: | 2 |
Seal: | 2-peace sealing system |
Ring Material: | Rolling Bearing Steel |
Rolling Element Material: | Rolling Bearing Steel |
Housing Material: | galvanized Sheet Steel |
Cage Material: | Sheet Steel |
Type of lubrication: | greased |
Lifetime lubricated: | yes |
Recommended tightening torque for shaft fastener (Nm): | 5 |
Bearing No.: | UC 203 |
Housing No.: | PP 204 |
Grub Screw: | M6 |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
min. Operating Temperature: | -20°C |
Norm: | DIN 626-2 |
Item weight: | 0,30 kg |
Features
Pillow block housing
- the housing is made of sheet steel and is thus suitable for space-saving installations
- increased corrosion resistance due to galvanized sheet steel
- housing with long base for mounting on flat surfaces
- low weight
- with an inner ring extended on both sides and grub screws (pre-assembled) for fastening the inner ring on a shaft
- smooth running and good behavior in case of tilting due to the extended inner ring
- the compensation of static misalignments is possible up to an angle of 5° due to the spherical outer surface of the outer ring
- two-piece sealing system: with sheet steel washer reinforced rubber seal inside; outside additionally with upstream slinger made of sheet steel for high mechanical protection against foreign matter
- lubricated for life; under normal operating conditions, relubrication is not necessary
Bearing insert / Radial insert ball bearing
The bearing insert is comparable with GYE17 (FAG), 56203, YAR203 (SKF), FB203.
In addition to this set, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.