Flange Bearing / Flange Housing Unit UCFL205 - Shaft: 25 mm
Item number: UCFL205
Item features:
The flange bearing UCFL205 is suitable for high radial loads and for installation in various applications. It is particularly robust with its gray cast iron housing. The adapter sleeve required for mounting the bearing insert is included.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 25 |
Tolerance for inside-Ø (mm): | 0,018/0 |
Housing Type: | 2 hole flanged housing unit |
Shaft Fastening: | Grub Screws |
Number of Mounting Holes: | 2 |
Ring Material: | Rolling Bearing Steel |
Rolling Element Material: | Rolling Bearing Steel |
Housing Material: | Cast Iron |
Cage Material: | Sheet Steel |
Type of lubrication: | greased |
Lifetime lubricated: | yes |
Recommended tightening torque for shaft fastener (Nm): | 5 |
Bearing No.: | UC 205 |
Housing No.: | FL 205 |
Grub Screw: | M6 |
Grease Nipples: | Straight Type A (180°) |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
min. Operating Temperature: | -20°C |
Norm: | DIN 626-2 |
Item weight: | 0,63 kg |
Features
- consisting of a ball bearing insert UC 205 and a cast iron housing FL 205
- the design as a 2-hole flange bearing allows installation in a variety of applications, even with limited space at the installation site and is suitable for high radial loads
- the housing is made of cast iron and therefore inexpensive and robust
- the bearing insert has an extended inner ring with grub screws
- The flange bearing is mounted on the shaft using two grub screws
- smooth running and good behavior with tilting due to the extended inner ring
- static misalignments can be compensated up to an angle of 2°
- two-piece sealing system: with sheet steel washer reinforced rubber seal inside; outside additionally with upstream slinger made of sheet steel for high mechanical protection against foreign matter
- lubricated for life; under normal operating conditions relubrication is not required
- housing with integrated lubrication hole
- to protect against corrosion, the housing is painted; the bearing insert and the mounting surface are treated with corrosion protection oil
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.