Flange Bearing / Flange Housing Unit UCFL208 - Shaft: 40 mm
Item number: UCFL208
Item features:
The flange bearing UCFL208 is suitable for high radial loads and for installation in various applications. It is particularly robust with its gray cast iron housing. The adapter sleeve required for mounting the bearing insert is included.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 40 |
Housing Type: | 2 hole flanged housing unit |
Tolerance for inside-Ø (mm): | 0,021/0 |
Number of Mounting Holes: | 2 |
Recommended tightening torque for shaft fastener (Nm): | 11 |
Housing Material: | Cast Iron |
Housing No.: | FL 208 |
Grub Screw: | M8 |
Cage Material: | Sheet Steel |
Bearing No.: | UC 208 |
Lifetime lubricated: | yes |
Norm: | DIN 626-2 |
Ring Material: | Rolling Bearing Steel |
Type of lubrication: | greased |
Grease Nipples: | Straight Type A (180°) |
Shaft Fastening: | Grub Screws |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
Rolling Element Material: | Rolling Bearing Steel |
min. Operating Temperature: | -20°C |
Item weight: | 1,60 kg |
Features
- consisting of a ball bearing insert UC 208 and a cast iron housing FL 208
- the design as a 2-hole flange bearing allows installation in a variety of applications, even with limited space at the installation site and is suitable for high radial loads
- the housing is made of cast iron and therefore inexpensive and robust
- the bearing insert has an extended inner ring with grub screws
- The flange bearing is mounted on the shaft using two grub screws
- smooth running and good behavior with tilting due to the extended inner ring
- static misalignments can be compensated up to an angle of 2°
- two-piece sealing system: with sheet steel washer reinforced rubber seal inside; outside additionally with upstream slinger made of sheet steel for high mechanical protection against foreign matter
- lubricated for life; under normal operating conditions relubrication is not required
- housing with integrated lubrication hole
- to protect against corrosion, the housing is painted; the bearing insert and the mounting surface are treated with corrosion protection oil
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.