Flange Housing Unit SS-UCPF211 as a Set Comprising Bearing Insert SS-UC211 and Flange Housing PF211 - Shaft: 55 mm
Item number:
SS-UCPF211-Set
Item features:
The housing bearing unit SS-UCPF211 as a set includes the round 3-hole flange housing PF211 and the single row radial insert ball bearing SS-UC211 (shaft: 55 mm). The set components are coordinated with each other so that they can be mounted directly. The set is suitable for high radial loads. With its sheet steel housing it is suitable for space-saving installations. The set SS-UCPF211 is geometrically comparable with: RRY55 (INA).
Set Components
Technical Data
Inside Ø (mm): | 55 |
Tolerance for inside-Ø (mm): | 0,024/0 |
Housing Type: | 3 hole flanged housing unit |
Shaft Fastening: | Grub Screws |
Number of Mounting Holes: | 4 |
Seal: | 2-peace sealing system |
Ring Material: | Stainless Steel |
Rolling Element Material: | Stainless Steel |
Housing Material: | galvanized Sheet Steel |
Cage Material: | Stainless Steel |
Type of lubrication: | greased |
Lifetime lubricated: | yes |
Recommended tightening torque for shaft fastener (Nm): | 22 |
Bearing No.: | SSUC 211 |
Housing No.: | PF 211 |
Grub Screw: | M10 |
Grease Nipples: | Yes |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
min. Operating Temperature: | -20°C |
Norm: | DIN 626-2 |
Item weight: | 1,87 kg |
Features
Flange housing
- the design as a round 3-hole flange bearing allows installation in a variety of applications, even with limited space at the installation site and is suitable for high radial loads
- the housing is made of sheet steel and is thus suitable for space-saving installations
- increased corrosion resistance due to galvanized sheet steel
- low weight
- with an inner ring extended on both sides and grub screws (pre-assembled) for fastening the inner ring on a shaft
- smooth running and good behavior in case of tilting due to the extended inner ring
- all components are made of stainless steel: the radial insert ball bearing is therefore corrosion resistant and hygienic.
- the compensation of static misalignments is possible up to an angle of 5° due to the spherical outer surface of the outer ring
- two-piece sealing system: with washer made of stainless steel reinforced rubber seal inside; outside additionally with upstream slinger made of stainless steel for high mechanical protection against foreign matter
- lubricated for life; under normal operating conditions, relubrication is not necessary
Bearing insert / Radial insert ball bearing
The bearing insert is geometrically comparable with GYE55 (FAG), 56211, YAR211 (SKF), FB211.
In addition to this set, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.