Englisch
Deutsch
Hybrid (Ceramics, Stainless Steel) High Precision Miniature Ball Bearing SS2 HC 696 2RS CN V2 P6 GS1 6x15x5 mm
Item number:
SS2-HC-696-2RS-CN-V2-P6-GS1
Item features:
The hybrid precision miniature ball bearing SS2-HC-696-2RS-CN-V2-P6-GS1 meets even the highest demands. It is sealed on both sides, versatile and can carry radial and light axial loads. The rubber seal provides effective protection against dust and dirt. The rings are made of stainless steel and the rolling elements of ceramic. Therefore, it is lighter and withstands higher speeds. The main dimensions correspond to DIN 625-1.
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 6 |
| Outside Ø (mm): | 15 |
| Width (mm): | 5 |
| Bore: | cylindrical |
| Extended Inner Ring: | no |
| Seal: | 2RS |
| Sealing material: | NBR |
| Ring Material: | Stainless Steel AISI 440C |
| Rolling Element Material: | Ceramics |
| Cage Material: | Stainless Steel |
| Type of lubrication: | greased |
| Lubrication: | Multemp SRL |
| Lifetime lubricated: | yes |
| Application: | Electric motors |
| Internal Clearance: | CN (Standard) |
| Tolerance Class: | ABEC 3 / P6 |
| Noise and vibration testing: | Class V2 |
| max. Operating Temperature: | +100°C (briefly up to +120°C) |
| min. Operating Temperature: | -40°C |
| Magnetic: | yes |
| Norm: | DIN 625-1 |
| Item weight: | 4 g |
Features
- designed as hybrid miniature ball bearing: rolling elements made of ceramic, inner and outer ring made of stainless steel. It has better corrosion resistance to mild media (e.g. fresh water) than SS.
- lighter than comparable deep groove ball bearings with steel balls as rolling elements; ceramic balls have a current-insulating effect; withstands higher speeds and has a high wear resistance
- tolerance class: P6 - high dimensional, form and running accuracy
- miniature ball bearing with smallest dimensions
- suitable for radial loads and light axial loads in both directions
- provides high running accuracy, quiet running and very high speeds
- vibration class: V2; lower tolerances with regard to occurring vibrations during operation
- cage material: stainless steel; corrosion resistant and suitable for continuous high temperatures
- seal: touching lip seal on both sides made of rubber (2RS) for high sealing effect
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
Further Information
- What does radial and axial load capacity mean?
- Fit recommendations for mounting
- Info sheet ball bearing
- Information about ball bearing seals
- Internal clearance and operating clearance
- Comparison list of roller bearings
- Comparison of features of roller bearings
- How do I clean my bearings?
- How do I grease or oil my bearings?
- Are bearings made of stainless steel 100 per cent corrosion-resistant?
- Can bearings made of stainless steel be magnetic?
- Informations about lubricant SRL
- How do I remove a sealing washer or cover plate?