Englisch
Deutsch
Yoke Type Track Roller NATV10-PP 10x30x15 mm
Item number:
NATV10-PP
Item features:
The full complement roller set yoke type track roller NATV10-PP can support high radial and also axial loads. Due to the profiled outer surface of the outer ring, it can compensate for axial loads from minor misalignments and skews.
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 10 |
| Outside Ø (mm): | 30 |
| Width (mm): | 15 |
| Tolerance for inside-Ø (mm): | 0/-0,008 |
| Tolerance for outside-Ø (mm): | 0/-0,009 |
| Tolerance for width (mm): | 0/-0,12 |
| Axial Guidance: | yes |
| Inner Ring: | yes |
| Seal: | PP |
| Ring Material: | Rolling Bearing Steel |
| Rolling Element Material: | Rolling Bearing Steel |
| Cage Material: | Sheet Steel |
| Type of lubrication: | greased |
| Application: | Conveyor technology |
| max. Operating Temperature: | +120°C |
| min. Operating Temperature: | -40°C |
| Magnetic: | yes |
| Norm: | ISO 7063 |
| Item weight: | 65 g |
Features
- it consists of a thick-walled outer ring with profiled outside surface profile and a full complement needle roller set, two rib washers are pressed on the inner ring
- since the bearing hasn´t got a cage, it has a particularly high load capacity by the maximum number of rolling elements and supports high radial and, because of the seal, can also support high axial loads
- with inner ring, can be used if the surface of the shaft is not suitable as a raceway
- with axial guidance
- seal: three-stage sealing on both sides by plastic axial plain washers (PP)
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.