Take-up Housing Unit with Adapter Sleeve UKT207+H2307 - Shaft: 30 mm
Item number: UKT207+H2307
Item features:
The take-up housing unit UKT207+H2307 is suitable for high radial loads. The housing can be moved and is therefore easy to install. It is particularly robust with its gray cast iron housing.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 30 |
Tolerance for inside-Ø (mm): | 0,021/0 |
Housing Type: | Take-up housing unit |
Shaft Fastening: | Adapter Sleeve |
Number of Mounting Holes: | 1 |
Ring Material: | Rolling Bearing Steel |
Rolling Element Material: | Rolling Bearing Steel |
Housing Material: | Cast Iron |
Cage Material: | Sheet Steel |
Type of lubrication: | greased |
Lifetime lubricated: | yes |
Housing Width a (mm): | 102 |
Housing Width To The Slot e (mm): | 89 |
Recommended tightening torque for shaft fastener (Nm): | 40 |
Bearing No.: | UK 207 |
Housing No.: | T 207 |
Grease Nipples: | Straight Type A (180°) |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
min. Operating Temperature: | -20°C |
Item weight: | 1,61 kg |
Features
- consisting of a ball bearing insert UK 207, a cast iron housing T 207 and an adapter sleeve H2307
- design as a radial bearing housing allows a displacement of the housing
- the housing is made of cast iron and therefore inexpensive and robust
- fixing of the inner ring by concentric adapter sleeve
- static misalignments can be compensated up to an angle of 2°
- two-piece sealing system: with sheet steel washer reinforced rubber seal inside; outside additionally with upstream slinger made of sheet steel for high mechanical protection against foreign matter
- lubricated for life; under normal operating conditions relubrication is not required
- housing with integrated lubrication hole
- to protect against corrosion, the housing is painted; the bearing insert and the mounting surface are treated with corrosion protection oil
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.