Stainless Steel Miniature Axial Deep Groove Ball Bearing SS F7-13M-d1-13 7x13x4.5 mm
Item number:
SS-F7-13M-d1-13
Item features:
For use in special conditions. The stainless steel miniature thrust bearing SS-F7-13M-d1-13 is small and suitable for spaces with limited space and on thin shafts. It absorbs loads from an axial direction, can be dismantled and is resistant to corrosion.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 7 |
Outside Ø (mm): | 13 |
Width (mm): | 4.5 |
Bore: | cylindrical |
Extended Inner Ring: | no |
Tolerance for inside-Ø (mm): | 0/-0,008 |
Tolerance for outside-Ø (mm): | 0/-0,011 |
Tolerance for width (mm): | 0,02/-0,25 |
Outside Ø Housing Washer (mm): | 13 |
Outside Ø Shaft Washer (mm): | 13 |
Inside Ø Housing Washer (mm): | 7.2 |
Inside Ø Shaft Washer (mm): | 7 |
Cage Material: | Stainless Steel |
Lifetime lubricated: | no |
Magnetic: | yes |
Ring Material: | Stainless Steel |
Type of lubrication: | oiled |
Tolerance Class: | ABEC 1 / P0 |
Rolling Element Material: | Stainless Steel |
max. Operating Temperature: | +250°C |
min. Operating Temperature: | -40°C |
Item weight: | 2,3 g |
Features
- miniature thrust bearing series
- all components are made of stainless steel: the thrust bearing is therefore corrosion resistant and hygienic.
- consists of a shaft washer, a spherical housing washer and a ball cage assembly
- suitable for particularly small shaft diameters
- suitable for very high speeds
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)
Further Information
- What does radial and axial load capacity mean?
- Fit recommendations for mounting
- Comparison list of roller bearings
- Comparison of features of roller bearings
- In which alignment do I mount my axial deep groove ball bearings?
- How do I clean my bearings?
- How do I grease or oil my bearings?
- Are bearings made of stainless steel 100 per cent corrosion-resistant?
- Can bearings made of stainless steel be magnetic?