Englisch
Deutsch
Split Pillow Block Housing SNL210 in a Set with Bearing Insert 2210, incl. 2 Locating Rings FRB-9/90
Item number:
SNL210-Set3
Item features:
The divisible housing SNL210 made of flake graphite cast iron comes in a set with the fitting self-aligning ball bearing insert 2210 and a pair of locating rings FRB-9/90. In addition, the matching seal set TG (double lip seal) is included. The components of the set are selected, so that the housing can be mounted directly.
Set Components
Technical Data
| Inside Ø (mm): | 50 |
| Inside Ø Seal (mm): | 60 |
| Housing Type: | Plummer block bearing |
| Seal: | open |
| Housing Material: | Cast Iron |
| Type of lubrication: | oiled |
| Locating Rings: | FRB-9/90 |
| Adapter Sleeve: | without |
| Bearing Insert: | 2210 |
| max. Operating Temperature: | +100°C |
| min. Operating Temperature: | -10°C-20°C |
| Item weight: | 3,69 kg |
Features
Pillow Block Housing
- the housing base is reinforced around the fastening holes and additonally strengthened with ribs, so there is no deformation during fastening of the housing; a centring collar helps with the alignment
- the seal set TG (double lip seal) is included
Self-Aligning Ball Bearing
- the self-aligning ball bearing 2210 in a cylindrical design has two rows of balls and can carry radial loads and axial loads in both directions
- due to the construction as a self-aligning ball bearing misalignments and deflections of the shaft can be compensated
- temperature resistance: from -10 °C to +100 °C
Locating Rings
- the locating rings FRB-9/90 fix the self-aligning ball bearing in the housing and prevent axial displacements
Accessories
- An inner ring can be used as a sleeve for the shaft: possible inner rings