Split Pillow Block Housing SNL215 in a Set with Bearing Insert 2215 TN, incl. 2 Locating Rings FRB-12.5/130
Item number:
SNL215-Set4
Item features:
The divisible housing SNL215 made of flake graphite cast iron comes in a set with the fitting self-aligning ball bearing insert 2215-TN and a pair of locating rings FRB-13.5/130. In addition, the matching seal set TG (double lip seal) is included. The components of the set are selected, so that the housing can be mounted directly.
Set Components
Technical Data
Inside Ø (mm): | 75 |
Inside Ø Seal (mm): | 85 |
Housing Type: | Plummer block bearing |
Seal: | open |
Housing Material: | Cast Iron |
Type of lubrication: | oiled |
Locating Rings: | FRB-12.5/130 |
Adapter Sleeve: | without |
Bearing Insert: | 2215-TN |
max. Operating Temperature: | +70°C+100°C |
min. Operating Temperature: | -10°C-20°C |
Item weight: | 8,36 kg |
Features
Pillow Block Housing
- the housing base is reinforced around the fastening holes and additonally strengthened with ribs, so there is no deformation during fastening of the housing; a centring collar helps with the alignment
- the seal set TG (double lip seal) is included
Self-Aligning Ball Bearing
- the self-aligning ball bearing 2215-TN in a cylindrical design has two rows of balls and can carry radial loads and axial loads in both directions
- due to the construction as a self-aligning ball bearing misalignments and deflections of the shaft can be compensated
- temperature resistance: from -10 °C to +70 °C
Locating Rings
- the locating rings FRB-13.5/130 fix the self-aligning ball bearing in the housing and prevent axial displacements