Self-Aligning Ball Bearing 1317 TN 85x180x41 mm
Item number:
1317-TN
Item features:
With the swiveling inner ring, the self aligning ball bearing 1317-TN offers excellent alignment error compensation. With the two rings of barrel-shaped rollers, it can absorb high radial forces. Main dimensions according to DIN 630.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 85 |
Outside Ø (mm): | 180 |
Width (mm): | 41 |
Tolerance for inside-Ø (mm): | 0/-0,02 |
Tolerance for outside-Ø (mm): | 0/-0,025 |
Tolerance for width (mm): | 0/-0,2 |
Bore: | cylindrical |
Extended Inner Ring: | no |
max. Operating Temperature: | +100°C (briefly up to +150°C) |
min. Operating Temperature: | -40°C |
Tolerance Class: | ABEC 1 / P0 |
Internal Clearance: | CN (Standard) |
Seal: | open |
Ring Material: | Rolling Bearing Steel |
Rolling Element Material: | Rolling Bearing Steel |
Cage Material: | Plastic |
Sealing material: | without |
Type of lubrication: | oiled |
Lifetime lubricated: | no |
Magnetic: | yes |
Norm: | DIN 630 |
Permissible angular misalignment: | 3° |
Item weight: | 4,98 kg |
Features
- self-aligning ball bearing with two rows of balls
- pivoting inner ring, misalignments and shaft deflections can be compensated
- suitable for high radial loads and light axial loads in both directions
- cage material: plastic; the low weight and the elasticity of the plastic have a positive effect on the sliding and emergency running properties as well as the shock resistance; suitable for quiet running
- seal: open (without seal); for higher speeds than with sealed ball bearings and easy relubrication
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)