Miniature Self-Aligning Ball Bearing 108 8x22x7 mm
Item number: 108
Item features:
For use in special conditions. The miniature self-aligning ball bearing 108 is small and suitable for installation with limited space and on thin shafts. It offers excellent alignment error compensation and can withstand high speeds. Main dimensions according to DIN 630.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 8 |
Outside Ø (mm): | 22 |
Width (mm): | 7 |
Tolerance for inside-Ø (mm): | 0/-0,008 |
Tolerance for outside-Ø (mm): | 0/-0,009 |
Tolerance for width (mm): | 0/-0,12 |
Bore: | cylindrical |
Extended Inner Ring: | no |
Seal: | open |
Sealing material: | without |
Ring Material: | Rolling Bearing Steel |
Rolling Element Material: | Rolling Bearing Steel |
Cage Material: | Sheet Steel |
Type of lubrication: | oiled |
Lifetime lubricated: | no |
Internal Clearance: | CN (Standard) |
Tolerance Class: | ABEC 1 / P0 |
max. Operating Temperature: | +120°C |
min. Operating Temperature: | -40°C |
Permissible angular misalignment: | 3° |
Magnetic: | yes |
Norm: | DIN 630 |
Item weight: | 14 g |
Features
- miniature ball bearing with smallest dimensions
- self-aligning ball bearing with two rows of balls
- pivoting inner ring, misalignments and shaft deflections can be compensated
- suitable for high radial loads and light axial loads in both directions
- cage material: stainless steel; corrosion resistant and suitable for continuous high temperatures
- seal: open (without seal); for higher speeds than with sealed ball bearings and easy relubrication
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)