Radial Spherical Plain Bearing - Requiring Maintenance GEEM45ES 2RS 45x68x40 mm
Item number:
GEEM45ES-2RS
The sealed Spherical Plain Radial Bearing GEEM45ES-2RS requires maintenance and has an extended inner ring and seals on both sides. It has a sliding contact surface combination steel/steel and is suitable for heavy static loads as well as for shock loads.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 45 |
Outside Ø (mm): | 68 |
Width (mm): | 40 |
Tolerance for inside-Ø (mm): | 0/-0,012 |
Tolerance for outside-Ø (mm): | 0/-0,013 |
Tolerance for width (mm): | 0/-0,12 |
Extended Inner Ring: | both sides |
Maintenance: | Requiring Maintenance |
Seal: | 2RS |
Ring Material: | Rolling Bearing Steel |
Sliding Contact Surface Combination: | steel/steel |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
min. Operating Temperature: | -30°C |
Item weight: | 0,43 kg |
Features
- suitable for heavy static radial loads and radial shock loads as well as for low axial loads
- extended inner ring on both sides
- with lubrication holes and lubrication groove in both rings
- suitable for bearing arrangements where a spacer sleeve is normally used on both sides of the inner ring
- seal: lip seal on both sides (2RS)
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- material: chrome steel (100Cr6)
- comparable with: GE45-HO-2RS (INA), GEM 45 ES-2RS (SKF)
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.