Rod End - Requiring Maintenance SA20ES 2RS 20x53x16 mm
Item number:
SA20ES-2RS
The rod end SA20ES-2RS with seals on both sides requires maintenance. It has a sliding contact surface combination steel/steel and is suitable for heavy static loads as well as for shock loads. It has an external thread. The main dimensions correspond to DIN ISO 12240-4 - dimension series E (DIN = German industrial norm).
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 20 |
Outside Ø (mm): | 53 |
Width (mm): | 16 |
Tolerance for inside-Ø (mm): | 0/-0,01 |
Tolerance for width (mm): | 0/-0,12 |
Mounting: | external thread (normal thread) |
Maintenance: | Requiring Maintenance |
Seal: | 2RS |
Ring Material: | Rolling Bearing Steel |
Sliding Contact Surface Combination: | steel/steel |
Type of lubrication: | oiled |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
min. Operating Temperature: | -30°C |
Norm: | DIN ISO 12240-4 |
Item weight: | 0,31 kg |
Features
- suitable for heavy static radial loads and radial shock loads as well as for low axial laods
- with right-hand thread
- relubrication through a lubrication hole in the housing
- seal: lip seal on both sides (2RS)
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.