Yoke Type Track Rollers of the series PWTR

Special feature of this series: Yoke type track rollers of the series PWTR, with axial guidance, have no cage. Because of the design with a double row, full complement cylindrical roller set, they are suitable for very high radial load capacities and, compared to the series NUTR, also for continous axial load capacities. The surface of the outer ring is spherical, so they can compensate for misalignment. They have rubber seals on both sides.

Datatable

Items 1 - 2 of 2

Reset all filters

Image may differ.

Yoke Type Track Roller PWTR15 2RS 15x35x19 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 20,02 €
from 10 pcs per 18,96 €
from 50 pcs per 18,54 €
from 200 pcs per 17,91 €
from 1000 pcs per 17,06 €

21,06 € *

incl. 19% VAT , plus (Briefversand)

Image may differ.

Yoke Type Track Roller PWTR1542 2RS 15x42x19 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 22,05 €
from 10 pcs per 20,88 €
from 50 pcs per 20,42 €
from 200 pcs per 19,73 €
from 1000 pcs per 18,80 €

23,21 € *

incl. 19% VAT , plus (Briefversand)

Items 1 - 2 of 2

FILTER

Reset all filters

Needle roller bearings are supplied with or without an inner ring. Needle roller bearings without an inner ring run directly on the shaft, which can save space. For this, there are higher requirements for the quality of shaft (surface, hardness).

Design of the Yoke type track rollers (axial guidance and/or with or without inner ring)

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Type of sealing of the bearing to protect it from contamination.

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.

Area in which the rolling bearing is used