Yoke Type Track Rollers of the series NATV-PP

Special feature of this series: Yoke type track rollers of the series NATV-PP, with axial guidance, are equipped with a full complement needle roller set and have no cage. They are suitable for high radial load capacities. The surface of the outer ring is spherical, so they can compensate for misalignment. They support higher loads than yoke type track rollers of the series NATR at the same inner diameter. They have axial plain washers on both sides. Due to this type of seal, they can support higher axial loads than yoke type track rollers with regular seals (Rubber and Metal).

Datatable

Items 1 - 2 of 2

Reset all filters

Image may differ.

Yoke Type Track Roller NATV20-PP 20x47x25 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 13,90 €
from 10 pcs per 13,16 €
from 50 pcs per 12,88 €
from 200 pcs per 12,44 €
from 1000 pcs per 11,84 €

14,63 € *

incl. 19% VAT , plus (Standard)

Image may differ.

Yoke Type Track Roller NATV25-PP 25x52x25 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 18,27 €
from 10 pcs per 17,30 €
from 50 pcs per 16,92 €
from 200 pcs per 16,35 €
from 1000 pcs per 15,58 €

19,23 € *

incl. 19% VAT , plus (Standard)

Items 1 - 2 of 2

FILTER

Reset all filters

Needle roller bearings are supplied with or without an inner ring. Needle roller bearings without an inner ring run directly on the shaft, which can save space. For this, there are higher requirements for the quality of shaft (surface, hardness).

Design of the Yoke type track rollers (axial guidance and/or with or without inner ring)

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Type of sealing of the bearing to protect it from contamination.

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.

Area in which the rolling bearing is used