Stud Type Track Roller KRV40 X PP 2HS 40x18x58 mm
Item number:
KRV40-X-PP-2HS
Item features:
Stable even in curves. The stud type track roller KRV40-X-PP can withstand high loads while rolling on a mating track. It is based on a full complement needle bearing and suitable for high speeds.
Technical ScribbleZoomable
Technical Data
Outside Ø (mm): | 40 |
Outside Ø Cones (mm): | 18 |
Width (mm): | 58 |
Tolerance for Outside Ø Roller (mm): | 0/-0,011 |
Tolerance for Outside Ø Cones (mm): | 0/-0,018 |
Tolerance for width (mm): | 0/-0,12 |
Mounting system: | Both sides hexagonal socket (2HS) |
Seal: | PP |
Ring Material: | Rolling Bearing Steel |
Rolling Element Material: | Rolling Bearing Steel |
Cage Material: | Sheet Steel |
Type of lubrication: | greased |
Application: | Conveyor technology |
max. Operating Temperature: | +120°C |
min. Operating Temperature: | -40°C |
Magnetic: | yes |
Norm: | ISO 7063 |
Item weight: | 0,25 kg |
Features
- there is a hexagonal socket on the roller and thread-side for assembly (= 2HS)
- are based on needle roller bearings
- it consists of a thick-walled outer ring with cylindrical outside surface profile, a solid roller stud with a thread for fixing, rolling ribs and a full complement needle roller set as well as a three-stage seal on both sides of the bearing provided by axial plain washers made of plastic
- it has a particularly high load capacity by the maximum number of rolling elements and supports either high radial or high axial loads
- with axial guidance
- the axial guidance is carried out by rolling elements and ribs
- seal: three-stage seal consisting of axial plain washers made of rubber on both sides (PP)
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.