Split Pillow Block Housing SNL209 in a Set with Bearing Insert 22209-CA-W33, incl. 2 Locating Rings FRB-3.5/85
Item number:
SNL209-Set5
Item features:
The divisible housing SNL209 made of flake graphite cast iron comes in a set with the fitting spherical roller bearing insert 22209-CA-W33 and a pair of locating rings FRB-3.5/85. In addition, the matching seal set TG (double lip seal) is included. The components of the set are selected, so that the housing can be mounted directly.
Set Components
Technical Data
Inside Ø (mm): | 45 |
Inside Ø Seal (mm): | 55 |
Housing Type: | Plummer block bearing |
Seal: | open |
Housing Material: | Cast Iron |
Type of lubrication: | oiled |
Locating Rings: | FRB-3.5/85 |
Adapter Sleeve: | without |
Bearing Insert: | 22209-CA-W33 |
max. Operating Temperature: | +100°C |
min. Operating Temperature: | -20°C |
Item weight: | 3,40 kg |
Features
Pillow Block Housing
- the housing base is reinforced around the fastening holes and additonally strengthened with ribs, so there is no deformation during fastening of the housing; a centring collar helps with the alignment
- the seal set TG (double lip seal) is included
Spherical Roller Bearing
- the spherical roller bearing 22209-CA-W33 in a cylindrical design has two rows of rollers and can carry radial loads and axial loads in both directions
- due to the construction as a spherical roller bearing misalignments and deflections of the shaft can be compensated
- temperature resistance: from -20 °C to +100 °C
Locating Rings
- the locating rings FRB-3.5/85 fix the spherical roller bearing in the housing and prevent axial displacements
Accessories
- An inner ring can be used as a sleeve for the shaft: possible inner rings