Radial Shaft Seals BA

Special feature of this series: Shaft seals of type BA are suitable for various applications. They are made of NBR elastomer rubber and have a sealing lip. Due to their material, they are characterized by a higher sealing effect than metal shaft seals (type B1). The vulcanized metal reinforcement ring ensures high strength and the steel spring for a tight fit on the shaft.

Datatable

Items 1 - 3 of 3

Reset all filters

Image may differ.

Radial Shaft Seal BA 10x17x6 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 1,62 €
from 10 pcs per 1,54 €
from 50 pcs per 1,50 €
from 200 pcs per 1,43 €
from 500 pcs per 1,36 €

1,70 € *

incl. 19% VAT , plus (Briefversand)

Image may differ.

Radial Shaft Seal BA 11x17x4 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 2,17 €
from 10 pcs per 2,05 €
from 50 pcs per 2,00 €
from 200 pcs per 1,92 €
from 500 pcs per 1,82 €

2,27 € *

incl. 19% VAT , plus (Briefversand)

Image may differ.

Radial Shaft Seal BA 6x17x6 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 2,17 €
from 10 pcs per 2,05 €
from 50 pcs per 2,00 €
from 200 pcs per 1,92 €
from 500 pcs per 1,82 €

2,27 € *

incl. 19% VAT , plus (Briefversand)

Items 1 - 3 of 3

FILTER

Reset all filters

All radial shaft seals have a sealing lip at the height of tension spring to seal off the liquid. BASL design radial shaft seals have an additional sealing lip on the dry side, which protects against dust and dirt.

Resistance of the materials used in the bearing to water and other corrosive media.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Material from which the bearing seal is made.

Material from which the springs for the backstop are made.