Radial Shaft Seals BA-FKM

Special feature of this series: Shaft seals of the BA-FKM type are suitable for various applications. They are made of FKM (fluoro rubber, e.g. VITON®) and have a sealing lip. By using FKM, the shaft seal is more heat resistant and chemically more resistant to aromatic hydrocarbons than NBR shaft seals. In addition, significantly higher speeds are possible and by using a tension spring made of stainless steel, the shaft seal is protected against corrosion. The vulcanized metal reinforcement ring ensures high strength and the tension spring made of stainless steel for a tight fit on the shaft.

Datatable

Items 1 - 2 of 2

Reset all filters

Image may differ.

Radial Shaft Seal BA-FKM 85x110x12 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 52,30 €
from 10 pcs per 49,54 €
from 50 pcs per 48,44 €
from 200 pcs per 46,24 €
from 500 pcs per 44,04 €

55,05 € *

incl. 19% VAT , (Briefversand)

Image may differ.

Radial Shaft Seal BA-FKM-SF 85x110x12 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 48,11 €
from 10 pcs per 45,58 €
from 50 pcs per 44,57 €
from 200 pcs per 42,54 €
from 500 pcs per 40,52 €

50,65 € *

incl. 19% VAT , (Briefversand)

Items 1 - 2 of 2

FILTER

Reset all filters

All radial shaft seals have a sealing lip at the height of tension spring to seal off the liquid. BASL design radial shaft seals have an additional sealing lip on the dry side, which protects against dust and dirt.

Resistance of the materials used in the bearing to water and other corrosive media.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Material from which the bearing seal is made.

Material from which the springs for the backstop are made.