Pillow Block Housing Unit with Adapter Sleeve UKP306+H2306 - Shaft: 25 mm
Item number: UKP306+H2306
Item features:
The pillow block bearing UKP306+H2306 is suitable for high radial loads and is particularly robust with its gray cast iron housing. The adapter sleeve required for mounting the bearing insert is included.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 25 |
Tolerance for inside-Ø (mm): | 0,021/0 |
Housing Type: | Plummer block bearing |
Shaft Fastening: | Adapter Sleeve |
Number of Mounting Holes: | 2 |
Ring Material: | Rolling Bearing Steel |
Rolling Element Material: | Rolling Bearing Steel |
Housing Material: | Cast Iron |
Cage Material: | Sheet Steel |
Type of lubrication: | greased |
Lifetime lubricated: | yes |
Recommended tightening torque for shaft fastener (Nm): | 45 |
Bearing No.: | UK 306 |
Housing No.: | P 306 |
Grease Nipples: | Straight Type A (180°) |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
min. Operating Temperature: | -20°C |
Item weight: | 2,01 kg |
Features
- consisting of a ball bearing insert UK 306, a cast iron housing P 306 and an adapter sleeve H2306
- suitable for mounting on flat surfaces and high radial load capacities
- the housing is made of cast iron and therefore inexpensive and robust
- fixing of the inner ring by concentric adapter sleeve
- static misalignments can be compensated up to an angle of 2°
- two-piece sealing system: with sheet steel washer reinforced rubber seal inside; outside additionally with upstream slinger made of sheet steel for high mechanical protection against foreign matter
- lubricated for life; under normal operating conditions relubrication is not required
- housing with integrated lubrication hole
- to protect against corrosion, the housing is painted; the bearing insert and the mounting surface are treated with corrosion protection oil
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.