Flange bearing sets of the series SS-UCPFL2 (Sheet Steel)

Special feature of this series: Flange bearing sets of the series SS-UCPFL2 consist of an inexpensive, lightweight sheet steel housing PFL2 and a separate SS-UC2 stainless steel bearing insert with extended inner ring and grub screws for fixing the inner ring on a shaft. Static misalignments can be compensated up to an angle of 5°. The design as a 2-hole flange bearing allows installation in a variety of applications, even with limited space at the installation site and is suitable for high radial loads. The housing is made of sheet steel and is thus suitable for space-saving installations. The galvanized sheet metal surface in combination with the stainless steel bearing insert results in overall good corrosion resistance.

Datatable

Items 1 - 1 of 1

Reset all filters

Image may differ.

Item number:

Item features:

39,27 € *

incl. 19% VAT , plus (Standard)

Items 1 - 1 of 1

Reset all filters

The way, the shaft is fixed with the bearing insert.

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Type of sealing of the bearing to protect it from contamination.

Article number of the bearing insert for housing bearings.

Article number of the housing. The shape and size of the housing can be derived from this.

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.