Deep Groove Ball Bearings of the series CE63 (Full Ceramic)

Special feature of this series: Full ceramic deep groove ball bearings of the CE-63 series have bigger dimensions than full ceramic deep groove ball bearings of the CE-62 series at the same inside diameter and they are heavier. They offer a balanced ratio between their radial load carrying capacity, the required installation space, their weight and the admissible speed. By using ceramic as a material for rings and rolling elements, they have a number of advantageous properties. They are lighter than comparable deep groove ball bearings made of bearing steel, wear-resistant, non-conductive, durable, corrosion-resistant, chemical-resistant and are characterized by high hardness and rigidity. They are available with cages of high temperature resistant (PEEK) or chemical resistant plastic (PTFE).

Datatable

Items 1 - 2 of 2

Reset all filters

Full Ceramic Deep Groove Ball Bearing CE6304 Si3N4 PEEK...

Image may differ.

Full Ceramic Deep Groove Ball Bearing CE6304 Si3N4 PEEK open 20x52x15 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 105,35 €
from 10 pcs per 99,50 €
from 50 pcs per 93,65 €
from 200 pcs per 87,80 €
from 1000 pcs per 81,94 €

117,06 € *

incl. 19% VAT , (Standard)

Full Ceramic Deep Groove Ball Bearing CE6304 Si3N4 PTFE...

Image may differ.

Full Ceramic Deep Groove Ball Bearing CE6304 Si3N4 PTFE open 20x52x15 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 96,29 €
from 10 pcs per 90,94 €
from 50 pcs per 85,60 €
from 200 pcs per 80,24 €
from 1000 pcs per 74,90 €

106,99 € *

incl. 19% VAT , (Standard)

Items 1 - 2 of 2

FILTER

Reset all filters

Special design of the ball bearing

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Accuracy of main dimensions (inner diameter, outer diameter and width). P0 is the standard tolerance class, P6 and especially P5 are a bit more precise.

The bearing clearance is the amount by which the two rings of a non-installed roller bearing can be displaced in relation to one another. There are different internal clearance classes. CN is "normal internal clearance" and is the best choice for many applications. C3, C4, ... indicates increased clearance. C2, C1, ... stands for reduced clearance.

Type of sealing of the bearing to protect it from contamination.

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Material from which the bearing seal is made.

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.

Area in which the rolling bearing is used

Some materials used for rolling bearings are magnetic.