Yoke Type Track Roller CRY26V 11.112x41.275x23.812 mm
Item number: CRY26V
Item features:
The full complement yoke type track roller CRY26V in inch-size can support high radial loads. Due to the cylindrical outer surface of the outer ring, it is especially suitable for supporting heavy loads.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 11.112 |
Outside Ø (mm): | 41.275 |
Width (mm): | 23.812 |
Tolerance for inside-Ø (mm): | 0/-0,008 |
Tolerance for outside-Ø (mm): | 0/-0,011 |
Tolerance for width (mm): | 0/-0,12 |
Axial Guidance: | yes |
Inner Ring: | yes |
Seal: | open |
Ring Material: | Rolling Bearing Steel |
Rolling Element Material: | Rolling Bearing Steel |
Cage Material: | Sheet Steel |
Type of lubrication: | greased |
Application: | Conveyor technology |
max. Operating Temperature: | +120°C |
min. Operating Temperature: | -40°C |
Magnetic: | yes |
Item weight: | 0,23 kg |
Features
- consists of a thick-walled outer ring with cylindrical outer surface. and a full complement needle roller set, two side plates are pressed on the inner ring
- since the bearing does not have a cage, it is particularly stable due to the highest possible number of rolling elements and supports high radial loads
- with inner ring, can be used if the surface of the shaft is not suitable as a raceway
- with axial guidance
- Seal: gap seals on both sides
- the black oxide finish leads to an increase in reliability and performance in demanding applications, especially with vibrations and low loads
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.