Miniature Pillow Block Housing Unit KP007 - Shaft: 35 mm (Silver-Series)
Item number: KP007
Item features:
The miniature pillow block bearing KP007 is suitable for particularly small shaft diameters and high radial loads. The housing is made of zinc die-cast and sturdy.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 35 |
Tolerance for inside-Ø (mm): | 0,021/0 |
Tolerance for width L (mm): | 0/-0,12 |
Housing Type: | Plummer block bearing |
Shaft Fastening: | Grub Screws |
Number of Mounting Holes: | 2 |
Ring Material: | Rolling Bearing Steel |
Rolling Element Material: | Rolling Bearing Steel |
Housing Material: | Zinc Die-Cast |
Cage Material: | Sheet Steel |
Type of lubrication: | greased |
Lifetime lubricated: | yes |
Recommended tightening torque for shaft fastener (Nm): | 22 |
Bearing No.: | K 007 |
Housing No.: | P 007 |
Grub Screw: | M10 |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
min. Operating Temperature: | -20°C |
Norm: | DIN 625-4 |
Item weight: | 0,51 kg |
Features
- consisting of a ball bearing insert K 007 and a zinc die-cast housing P 007
- suitable for mounting on flat surfaces and high radial load capacities
- the housing is made of zinc die-cast
- the bearing insert has an extended inner ring with grub screws
- The pillow block bearing is mounted on the shaft with two grub screws
- the bearing insert can compensate for low static misalignment
- two-piece sealing system: with sheet steel washer reinforced rubber seal inside; outside additionally with upstream slinger made of sheet steel for high mechanical protection against foreign matter
- lubricated for life; under normal operating conditions relubrication is not required
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.