Yoke Type Track Rollers of the series RSTO

Special feature of this series: Yoke type track rollers of the series RSTO, without axial guidance, do not have an inner ring. They are thus considerably lighter than yoke type track rollers of other series and have a small outer diameter compared to the inner diameter. Despite their reduced weight they can support moderate radial loads compared to heavier yoke type track rollers. They can be used when the shaft is suitable as a raceway. The surface of the outer ring is spherical, so they can compensate for misalignment. They are dismountable.

Datatable

Items 1 - 1 of 1

Reset all filters

Yoke Type Track Roller RSTO35 42x72x19.8 mm

Image may differ.

Yoke Type Track Roller RSTO35 42x72x19.8 mm

Item number: RSTO35

Item features:

Delivery time: Available

from 4 pcs per 25,04 €
from 10 pcs per 23,73 €
from 50 pcs per 23,19 €
from 200 pcs per 22,41 €
from 1000 pcs per 21,35 €

26,36 € *

incl. 19% VAT , plus (Briefversand)

Items 1 - 1 of 1

FILTER

Reset all filters

Needle roller bearings are supplied with or without an inner ring. Needle roller bearings without an inner ring run directly on the shaft, which can save space. For this, there are higher requirements for the quality of shaft (surface, hardness).

Design of the Yoke type track rollers (axial guidance and/or with or without inner ring)

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Type of sealing of the bearing to protect it from contamination.

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.

Area in which the rolling bearing is used