Yoke type track rollers of the series NAST

Special feature of this series: Yoke type track rollers of the series NAST, are suitable for high radial loads. The outer surface of the outer ring is cylindrical, so they are particularly suitable for supporting high loads. They have two side plates and are dismountable.

Datatable

Items 1 - 2 of 2

Reset all filters

Yoke Type Track Roller NAST30 ZZ / 2Z 30x62x25 mm

Image may differ.

Yoke Type Track Roller NAST30 ZZ / 2Z 30x62x25 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 21,04 €
from 10 pcs per 19,29 €
from 50 pcs per 17,79 €
from 200 pcs per 16,78 €
from 500 pcs per 15,78 €

25,05 € *

incl. 19% VAT , plus (Standard)

Yoke Type Track Roller NAST35 ZZ / 2Z 35x72x25 mm

Image may differ.

Yoke Type Track Roller NAST35 ZZ / 2Z 35x72x25 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 22,99 €
from 10 pcs per 21,07 €
from 50 pcs per 19,43 €
from 200 pcs per 18,34 €
from 500 pcs per 17,24 €

27,37 € *

incl. 19% VAT , plus (Standard)

Items 1 - 2 of 2

FILTER

Reset all filters

Needle roller bearings are supplied with or without an inner ring. Needle roller bearings without an inner ring run directly on the shaft, which can save space. For this, there are higher requirements for the quality of shaft (surface, hardness).

Design of the Yoke type track rollers (axial guidance and/or with or without inner ring)

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Type of sealing of the bearing to protect it from contamination.

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.

Area in which the rolling bearing is used