Englisch
Deutsch
Yoke Type Track Roller RSTO30 38x62x19.8 mm
Item number: RSTO30
Item features:
The yoke type track roller RSTO30 can be mounted directly on the shaft as it has no inner ring. It is therefore suitable for receiving radial loads in limited spatial conditions. Due to the profiled outer surface of the outer ring, it can compensate minor misalignments and skews.
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 38 |
| Outside Ø (mm): | 62 |
| Width (mm): | 19.8 |
| Axial Guidance: | no |
| Tolerance for inside-Ø (mm): | 0,041/0,025 |
| Tolerance for outside-Ø (mm): | 0/-0,013 |
| Tolerance for width (mm): | 0/-0,12 |
| Application: | Conveyor technology |
| Seal: | open |
| Inner Ring: | no |
| Cage Material: | Sheet Steel |
| Magnetic: | yes |
| Ring Material: | Rolling Bearing Steel |
| Type of lubrication: | oiled |
| max. Operating Temperature: | +120°C |
| Rolling Element Material: | Rolling Bearing Steel |
| min. Operating Temperature: | -40°C |
| Item weight: | 0,26 kg |
Features
- it consists of a thick-walled outer ring with spherical outside surface profile and a needle roller and cage assembly, it is not sealed but filled with grease
- supports high radial loads
- The profiled outer surface compensates minor misalignments and skews.
- without inner ring, can be installed directly on the shaft
- can be used if the surface of the shaft is suitable as a raceway
- without axial guidance
- dismountable
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.