Yoke Type Track Roller RSTO10 14x30x11.8 mm
Item number: RSTO10
Item features:
The yoke type track roller RSTO10 can be mounted directly on the shaft as it has no inner ring. It is therefore suitable for receiving radial loads in limited spatial conditions. Due to the profiled outer surface of the outer ring, it can compensate minor misalignments and skews.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 14 |
Outside Ø (mm): | 30 |
Width (mm): | 11.8 |
Tolerance for inside-Ø (mm): | 0,027/0,016 |
Tolerance for outside-Ø (mm): | 0/-0,009 |
Tolerance for width (mm): | 0/-0,12 |
Axial Guidance: | no |
Inner Ring: | no |
Seal: | open |
Ring Material: | Rolling Bearing Steel |
Rolling Element Material: | Rolling Bearing Steel |
Cage Material: | Sheet Steel |
Type of lubrication: | oiled |
Application: | Conveyor technology |
max. Operating Temperature: | +120°C |
min. Operating Temperature: | -40°C |
Magnetic: | yes |
Item weight: | 42 g |
Features
- it consists of a thick-walled outer ring with spherical outside surface profile and a needle roller and cage assembly, it is not sealed but filled with grease
- supports high radial loads
- The profiled outer surface compensates minor misalignments and skews.
- without inner ring, can be installed directly on the shaft
- can be used if the surface of the shaft is suitable as a raceway
- without axial guidance
- dismountable
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.