Yoke Type Track Roller NATR8 8x24x15 mm
Item number: NATR8
Item features:
The yoke type track roller NATR8 can support high radial loads. Due to the profiled outer surface of the outer ring, it can compensate for axial loads from minor misalignments and skews.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 8 |
Outside Ø (mm): | 24 |
Width (mm): | 15 |
Axial Guidance: | yes |
Tolerance for inside-Ø (mm): | 0/-0,008 |
Tolerance for outside-Ø (mm): | 0/-0,009 |
Tolerance for width (mm): | 0/-0,12 |
Application: | Conveyor technology |
Seal: | gap seal on both sides |
Inner Ring: | yes |
Cage Material: | Sheet Steel |
Magnetic: | yes |
Norm: | ISO 7063 |
Ring Material: | Rolling Bearing Steel |
Type of lubrication: | greased |
max. Operating Temperature: | +120°C |
Rolling Element Material: | Rolling Bearing Steel |
min. Operating Temperature: | -40°C |
Item weight: | 41 g |
Features
- it consists of a thick-walled outer ring with profiled outside surface profile and a cage-guided needle-insert, two rib washers are pressed on the inner ring
- supports high radial and axial loads from slight misalignments and skewed running
- with inner ring, can be used if the surface of the shaft is not suitable as a raceway
- with axial guidance
- seal: gap seal on both sides
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.